- Induction ducting
- engine strip down
- is it ok to fit after market pedals?
- Coolant Useage
- Defi Oil Pressure sensor
- can phase 2 injectors fit phase 1
- What dya think?
- mapping apexi powerfc
- 93 legacy dies at highway speeds... help
- Cusco roll cages
- Valves, Whats the difference?
- Clutch/error code woes
- Changes Discs And It Still Judders..??
- Found Cheap SSQV Dump Valves?????
- Adjusting Actuator?
- Turbo surge
- lambda cure
- Help identify this noise PLEASE!!
- scooby owner again! problems already someone help PLEASE!!!
- Acceleration measurement
- Gone from a Classic to a Bugeye - some issues or is it just me ...
- Engine won't start after Rebuild??
- What plugs?
- anyone help with this?
- What filter should I use?
- vacuum pipe diagrams/ help
- Few questions regarding fitting STI RA V-LIMITED engine into '96 WRX ?
- Lost keys!!!
- Bailey DV12 will it go on a classic
- EXHAUST FOR 06 STI?
- What turbo???
- Best pad upgrade?
- giude how to port headers.
- revs drop
- spotting a prodrive performance pack?
- Mahle Pistons
- boost problems?
- Blue injectors
- dump valve adjustment help
- cat advice plz
- Dyno hp reading
- failed mot on emissions
- ADVICE ON CHOOSING FMIC
- Air con compressor clutch not activating
- blow off valve stopped working
- What is this unconnected wire next to the boost solenoid?
- HAS ANYONE USED WOSSNER FORGED RACE PISTONS.
- wanted
- head bolts
- Clutch Judder / Shudder
- Best Intake for 400bhp
- After market Rev Limiter / Launch Control
- ppp on 03 wrx
- Ecutek remapped, should I get some sort or licence paperwork and another question
- Scooby Wont Start. Please help
- What exhaust?
- Crankshaft sensor
- STI VERSION4 TUNING HELP!!!!!!!!!!
- turbosmart supersonic bov?
- car pongs
- ENGINE DISMANTLE
- Random Alarm problem? Any ideas?
- think i have a leak...
- 90000 service sugestions on oil
- What Oil?
- Induction Kit Advice...
- Air filter induction kit ?
- What Next????
- blobeye PPP question
- Air bag
- Knocking at idle speed with V-Power
- DIY aircon re-gas
- ECU identification
- Changing injectors ?
- ecu reset procedure
- Need to change my cam belt need cam locker tool!!!!!!
- idle rpm tooo high
- Turbos, post and pre 97
- Help needed - 1998 uk turbo ecu pinouts
- cams
- cams
- Hyperflow Tmic Classic Review
- Splutter/putt putt putt
- blitz i-color Qs
- Differences between MY01/02 JDM Bugeye and MY03 UK Blobeye