- Advice on these mods appreciated
- More noise for me!
- Most quiet back box
- Does your clutch judder when pulling away?
- What voltage should i see from the MAF sensor
- URGENT.....engine torque settings please :(
- Forge DV question Red Vs Blue spring!!
- Expensive to replace turbo oil seals?
- Who knows stuff about diffs ?
- New plugs
- Answers needed!Downpipe fitting
- ** quickshift fitting problems **
- Please Explain!
- Pace FMIC and APS cold air induction kit fit - enough space
- 5th gear problem
- Prop-shaft bearing?
- what upgrades best on a P1
- matching the uppipe with the turbo exhaust housing a good idea ?????
- Exhaust Question
- FMIC Water Spray (temps)
- DIY fitting air filter, MY94 Jap import STI 1
- Jetex Exhaust
- Power drop!!!!!
- Dump Valves - Are they safe on Impreza
- MAF sensor or Wastegate
- K&N 57i Filter
- Tek 2 ECU
- MAF voltages - reading low and detonation
- Strengthened Gearsets:
- wobling crankshaft pully
- AVCS - can you run with it unplugged?????
- Induction/Exhaust - Italian products for WRX
- advice please
- Different turbo, do I need to...........
- gear oil change
- EJ20G blown piston
- engine torque settings please?
- Diff control ??????
- Is It Normal ????????????????
- TURBOS??
- Recommend a DV
- I want one that 'POPS' an exhaust that is....
- Anyone know how to read the rear o2 sensor on MY01/02 yet?
- header tank info needed pppplleeeaaassseeeee
- STi7 Exhaust Question
- source of exhaust gaskets etc
- Map Sensor
- Which Bigger Turbo?
- Help Wanted to find Bigger Injectors
- does I need bigger Injectors ???
- Matched Headers???
- my car will not start
- Is this supposed to be ticking - what the heck happened last time?
- problem with dawes device ? Help !
- Standard Boost MY98?
- Water Injection Pics
- down pipe ss vs PE 65
- Can you use the Bosch knocklink sensor instead of the factory one?
- Coolant tank needed (water resevoir)
- Fuel Pump ?
- Source for IHI turbos
- Do I need rolling road set up??
- I fitted my fuel pump and lived to tell the tale
- anyone know the rough weight of standard flywheel and clutch cover?
- best front mount intercooler
- Dawes AFR
- MY99 ECU and VF hybrid - ignition
- HELP WITH N F RACE FORMULA
- Pace FMIC
- Kicking Out The Cat?!
- Limitations on EJ20 or EJ25 Open Deck Blocks
- What side of the engine is the left bank?
- And the PPP comprises.......
- Very variable power with TEK2
- How do I change the exhaust?
- bore clearance for cossie pistons?
- Power "surge"
- blitz induction
- what the hell is a 'Dayco' cambelt
- help!.....torque settings for bolting block halves together??
- exhaust fumes
- Grating noise when on first press of accelerator
- Restrictor? in pipe to boost gauge
- Downpipe heat shield question
- PPP MY01 (TORQUE CURVES)