source of exhaust gaskets etc
#1
Scooby Regular
Thread Starter
I've got a new turbo to fit, and at the same time I'll fit one of Tim's shiney new up-pipes.
I know GGR do them, but can anyone recommend a place for gaskets at each end of uppipe, turbo to downpipe and probably some new bolts/studs/nuts.
cheers
paul
I know GGR do them, but can anyone recommend a place for gaskets at each end of uppipe, turbo to downpipe and probably some new bolts/studs/nuts.
cheers
paul
#2
for gaskets mate, i got mine from the dealer. were £6 each mind, but are good.
as for studs/nuts, let me know what you need and i can get them from work and post em up for free, we've got hundreds of each there.
cheers
ian
p.s. hows the wideband coming on?
as for studs/nuts, let me know what you need and i can get them from work and post em up for free, we've got hundreds of each there.
cheers
ian
p.s. hows the wideband coming on?
#3
Scooby Regular
Thread Starter
wideband finished except the cable, just need to crimp the connector. Might have a go tonight.
fitted fuel pump,
I have decided not to go the full hog with the engine just yet. I was looking at doing heads, pistons, rods etc. But I think i'll spend less money on more oil for now!
Will do the chargecooler pump and rad, injectors, suspension from rich wild and brakes. I think the big engine work is next year. Brakes and suspension most important for track.
paul
fitted fuel pump,
I have decided not to go the full hog with the engine just yet. I was looking at doing heads, pistons, rods etc. But I think i'll spend less money on more oil for now!
Will do the chargecooler pump and rad, injectors, suspension from rich wild and brakes. I think the big engine work is next year. Brakes and suspension most important for track.
paul
#7
yeah, just tell me which bolts/nuts etc.
i know the sizes and threads........if not they are all on my garage floor...still, just waiting to get the block back from the rebore, monday morning.
i know the sizes and threads........if not they are all on my garage floor...still, just waiting to get the block back from the rebore, monday morning.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM