Water Injection Pics
#1
Can anyone that has WI fitted please post some piccies as I am planning to install a kit over the next week but could do with some ideas on locations for some of the kit etc etc
#2
Best place is to make up a plate for the WI and there is a tapped hole on the left front chassis member (ie on the right as you look into the bonnet - the tapped hole is on the member below the fuel filter.
You will need to take your IC off to get access - but it should be clear and the hole takes a good size bolt to fix your plate to. I also put very high density foam padding under the plate to help control vibration to the WI kit and stop noise from the pump coming through the bulkhead.
Trout
[Edited by Trout - 8/16/2002 9:08:45 AM]
You will need to take your IC off to get access - but it should be clear and the hole takes a good size bolt to fix your plate to. I also put very high density foam padding under the plate to help control vibration to the WI kit and stop noise from the pump coming through the bulkhead.
Trout
[Edited by Trout - 8/16/2002 9:08:45 AM]
Thread
Thread Starter
Forum
Replies
Last Post