UkLegacyT

hi,

does anyone know the torque settings for the turbo engine?

needed asap

thanks
ian

UkLegacyT

top

Claudius

What do you mean?

Do you want to know
- how much torque your engine has
- how much torque you need for the head bolts / rod bolts / etc?
- something else?

UkLegacyT

bolts to hold block halves together
cylinder head bolts
flywheel to crank bolts
clutch cover to flywheel bolts (done 15lb/ft when changed the clutch....correct??)
front crank pulley
big-end bolts
camshaft pulley bolts
bolts on the camshaft bearing caps

Claudius

I see

I guess you could do with a copy of the work shop manual for your car then.

Try and find an online copy of it. If you cant, I can do a search for you What's your exact car model year and engine?

NotoriousREV

Claudius, if you can find an online manual, in english, for a 93 WRX, you'll have my undying gratitude and respect.

Big Bear

Cylinder heads sequence :-
Bolt sequence
3 1 6
<front of engine<
5 2 4

1)Apply a coat of oil to washers and bolt threads

2) Tighten all bolts to 29 nm or 22lbs/ft
Tighten all bolts to 69 nm or 51lbs/ft

3)Back off all bolts by 180 degrees and then back them off by a further 180 degrees

4)Tighten bolts 1 and 2 to 34 nm or 25 lbs/ft

5)Tighten bolts 3, 4, 5 and 6 to 15 nm or 11 lbs/ft

6)Tighten all bolts by 80-90 degrees

7)Tighten all bolts by a further 80-90 degrees (do not turn more than 90 degrees)

Hope this helps Dave

[Edited by Big Bear - 8/19/2002 4:12:52 PM]

UkLegacyT

Dave, thats excellent mate

Claudius, if you can find anything on the net regarding the other settings,that would be great. ive had a look on owners sites etc, but couldnt find anything.
my engine is a 1996 UK. is the impreza type EJ20 Turbo.

thanks to you both

ian

Claudius

Let me take a look

Chris.Palmer

YHM

UkLegacyT

chris, yhm back, thanks

RoShamBo

iTrader: (1)

http://www.scoobynet.co.uk/bbs/thread.asp?ThreadID=83640

Ro.