Alcatek V5-V6 with AVCS board, what's it worth?
#1
Alcatek V5-V6 with AVCS board, what's it worth?
I have just finished installing my Link G4+ and started it up so I really have no use of my old Alcatek ecu. I just have no idea at all of what it could be worth, also it's pointless trying to sell here in Sweden as most mappers probably wan't nothing to do with it.
I bought it in 2010 I think as a Simtek so it was updated in 2016 to the Alcatek and also the AVCS extension board was added so that I could run the AVCS heads in my Type R. ALS and launch control should be activated as I paid for it with the update. I also have the customer programmer kit. I did start my build up with this ECU so it seems to work fine but I didn't bother try to get it mapped here.
So any ideas of what I could ask for this?
I bought it in 2010 I think as a Simtek so it was updated in 2016 to the Alcatek and also the AVCS extension board was added so that I could run the AVCS heads in my Type R. ALS and launch control should be activated as I paid for it with the update. I also have the customer programmer kit. I did start my build up with this ECU so it seems to work fine but I didn't bother try to get it mapped here.
So any ideas of what I could ask for this?
Last edited by Turbovin; 09 October 2018 at 01:41 AM.
#4
Scooby Regular
iTrader: (51)
#5
I'm not sure. I could access the maps with my own software and did some changes too. It was never mapped by Enginetuner,( a long drive from Sweden), they just helped me with the upgrade as we no longer had a Simtek/Alcatek dealer anymore. So the whole point was to get it mapped by someone else here. It was just supplied with a base map to get it started.
#6
Actually I think that they didn't even try my ecu in a car and they didn't have a way of powering the ecu otherwise so I had to load the Enginetuner map myself. So it came directly from Alcatek that way so I can't see how it could be locked but I'm not sure about how these things work.
I understand it won't be worth a lot but better that someone gets some use for it for a fair price.
I understand it won't be worth a lot but better that someone gets some use for it for a fair price.
#7
Scooby Regular
iTrader: (51)
Totally agree with you mate,but In the UK its practically a dead format, you might have luck selling In other countries though....The owner of Alcatek himself is solely to blame for it's demise.My wife has one on her car at present but will be changed over to a link ecu like yourself as regular updates and aftercare is a must.SJ.
Trending Topics
#9
Scooby Regular
you can still get them updated and swapped for mappers ,, you just can't get hold of Andy (and most people want to speak to him for some reason lol) ,,, iv had three done in recent months without much problem , just sent them in with what I wanted written inside the box and they were returned within a few weeks
#11
Thanks, now I know roughly what it could be worth. I'll probably price it a bit cheaper than that as the shipping from Sweden to the UK costs more than the other way around. I'll put it up for sale soon, otherwise feel free to pm me if there's any interest.
It does make a very neat install with the AVCS heads in a V5-V6 combined with the JT innovations AVCS loom (I'm not including the loom). A little bit of rewiring was needed to get it to work with the Link G4+
It does make a very neat install with the AVCS heads in a V5-V6 combined with the JT innovations AVCS loom (I'm not including the loom). A little bit of rewiring was needed to get it to work with the Link G4+
Last edited by Turbovin; 10 October 2018 at 01:50 PM.
#12
Scooby Regular
iTrader: (51)
you can still get them updated and swapped for mappers ,, you just can't get hold of Andy (and most people want to speak to him for some reason lol) ,,, iv had three done in recent months without much problem , just sent them in with what I wanted written inside the box and they were returned within a few weeks
#13
Scooby Regular
iTrader: (4)
You keep on saying that domino....but I asked you for the address contact to where to send it to for my mate and i'm still waiting for your reply...so if you can send me the address of where to send the alcatek ecu for change of mapper that would be appreciated as my mate has had no joy either way,thats why my wife is upgrading to a link ecu when she upgrades to a bigger turbo at SC....They were a good ecu once when they had the Dev support,but regardless what anyone says Alcatek is finished in the UK...anyone that is building a project car now will not be buying an alcatek ecu to run the engine thats for sure.SJ.
#14
Scooby Regular
iTrader: (51)
Thanks for that John,he told me that he contacted the mapper who mapped it before “Duncan” That he would prefere a tuner closer to him to map it as he leaves in York but was told by Duncan that the only mapper that can map it is himself which I thought was ridiculous,as you by the ecu not the mapper,but I will tell him what you have told me,Thanks again.SJ.
Last edited by stonejedi; 11 October 2018 at 11:12 AM.
#15
Scooby Regular
You keep on saying that domino....but I asked you for the address contact to where to send it to for my mate and i'm still waiting for your reply...so if you can send me the address of where to send the alcatek ecu for change of mapper that would be appreciated as my mate has had no joy either way,thats why my wife is upgrading to a link ecu when she upgrades to a bigger turbo at SC....They were a good ecu once when they had the Dev support,but regardless what anyone says Alcatek is finished in the UK...anyone that is building a project car now will not be buying an alcatek ecu to run the engine thats for sure.SJ.
sorry mate either forgot or didn't get the message ,, will pm it to you now
#17
Scooby Regular
no probs mate , sorry again it wasn't sooner ,,,, like you said its not worth people buying them unless they know what they are doing with them and have lots of spare time to chase if it goes missing , iv got three of them so it was worth me doing the research to get the info I needed ,,, tell your mate to insure it for the cost of a syvecs and then if it doesn't get retuned he can claim for another ecu lol
#18
Scooby Regular
iTrader: (51)
no probs mate , sorry again it wasn't sooner ,,,, like you said its not worth people buying them unless they know what they are doing with them and have lots of spare time to chase if it goes missing , iv got three of them so it was worth me doing the research to get the info I needed ,,, tell your mate to insure it for the cost of a syvecs and then if it doesn't get retuned he can claim for another ecu lol
Thread
Thread Starter
Forum
Replies
Last Post
Kyokudo Racing
General Technical
3
06 October 2008 06:02 PM
alfriedesq
General Technical
4
17 August 2002 09:40 AM