Spivscooby

iTrader: (1)

Just had inlet manifold repowder coated any ideas on cleaning inside before refitting ?

wotagr8bigchief

iTrader: (1)

Just had the same problem, I was told blow out with an airline but due to the rough surface inside the inlet there was loads of crap left. Ended up using carb cleaner and a rag, poking the rag down with a screwdriver from the throttle body hole, then turning over and doing the same from the inlet holes. Took about an hour and a whole can of carb cleaner to do it.

Spivscooby

iTrader: (1)

Yea I airlined mine last night and washed it all out but still got crap in there going to get baby bottle brush and give it another clean later have you refitted urs?

wotagr8bigchief

iTrader: (1)

Yeah that should do the trick, I had to re-fit mine same day so had no choice but bottle brush should defo be faster.

Spivscooby

iTrader: (1)

Ok mate thanks yours all back and working fine now?

wotagr8bigchief

iTrader: (1)

No engines still out of mine, just got to fit my parallel fuel lines then its going back in. Hopefully early next week.

Spivscooby

iTrader: (1)

Thanks for help hope all goes well