306 D Turbo window problem
#1
Scooby Regular
Thread Starter
iTrader: (46)
Join Date: Nov 2005
Location: Probably polishing it.Lol
Posts: 5,381
Likes: 0
Received 0 Likes
on
0 Posts
306 D Turbo window problem
Got a 306 for running around in and the electric front windows don't work.[they did last week]
There is no power to the switch and the fuse is in tact.
The passenger side switch doesn't work either and the rear windows are manual.
There is no clicking from a relay when the switches are operated.
Any ideas?
There is no power to the switch and the fuse is in tact.
The passenger side switch doesn't work either and the rear windows are manual.
There is no clicking from a relay when the switches are operated.
Any ideas?
#2
Scooby Regular
Join Date: Aug 2006
Location: In the throes of ecstasy
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
Have you checked for power at the fuse? You could push the fuse spade connectors back on my old 306, and not make a connection.
There may be a wire break in the door shut loom.
There may be a wire break in the door shut loom.
#4
Scooby Regular
Join Date: Jul 2007
Location: Guernsey
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
Mine did exactly the same, if you wanted to close the front passenger window you actually had to open the door before the window would close as there was a damaged cable in the loom..
I always thought that they had a design floor in the loom bacause the loom was connected door side rather than at the shell side it would be so much easier to fix if you were able to remove the loom from the door rather than having to try to repair it on the car..
Although if it does turn out to be one of the switches i have got a couple of spare ones still in my garage if needed..
Lee
I always thought that they had a design floor in the loom bacause the loom was connected door side rather than at the shell side it would be so much easier to fix if you were able to remove the loom from the door rather than having to try to repair it on the car..
Although if it does turn out to be one of the switches i have got a couple of spare ones still in my garage if needed..
Lee
#5
Scooby Regular
iTrader: (3)
Join Date: Aug 2000
Location: 1600cc's of twin scroll fun :)
Posts: 25,565
Likes: 0
Received 2 Likes
on
2 Posts
if the car has a few miles on it and the door interconnecting loom has not been replaced then that is probably the culprit, these are approximately £75 each from a dealer, then you need them fitting so double that price.
Tony
Tony
#7
Scooby Regular
Join Date: Jul 2007
Location: Guernsey
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
On yours do you have controls for both front windows on the drivers side? if so you could have a fault on the drivers side thats causing the problem to be on both sides.
Trending Topics
#8
Scooby Regular
Thread Starter
iTrader: (46)
Join Date: Nov 2005
Location: Probably polishing it.Lol
Posts: 5,381
Likes: 0
Received 0 Likes
on
0 Posts
Last week, the drivers side drivers switch worked, but the passenger switch on the same control didn't work, but the passenger side switch did work.
Now, none of the switches work which is why I doubt the looms have gone simultaneously.
Thread
Thread Starter
Forum
Replies
Last Post
MightyArsenal
Wheels, Tyres & Brakes
6
25 September 2015 08:31 PM