Fuel pressure gauge
14 June 2012, 07:03 PM
Scooby Regular
Thread Starter
Join Date: Jan 2005
Location: never far away from my impreza
Posts: 7,843
Likes: 0
Received 0 Likes
on
0 Posts
Fuel pressure gauge
Just in the process of ordering a stack fuel pressure gauge and just want to know where the solid state sensor is mounted to accurately read the fuel pressure.
Cheers lee
14 June 2012, 07:21 PM
Scooby Regular
Join Date: Jun 2010
Location: C+K MOTORS
Posts: 11,769
Likes: 0
In your FPR Lee where you have your gauge you recently bought
14 June 2012, 08:09 PM
Scooby Regular
Thread Starter
Join Date: Jan 2005
Location: never far away from my impreza
Posts: 7,843
Likes: 0
Received 0 Likes
on
0 Posts
Thought so Ryan just wanted confirmation thanks while your on mate the sender for oil temp is that of the sandwich plate or on the block were though ?
14 June 2012, 09:32 PM
Scooby Regular
Join Date: Jun 2010
Location: C+K MOTORS
Posts: 11,769
Likes: 0
Either or doesn't matter to much BUT seeing as it's only a track day car I would go above cylinder No3 as it is a known hot spot
14 June 2012, 10:10 PM
Scooby Regular
Thread Starter
Join Date: Jan 2005
Location: never far away from my impreza
Posts: 7,843
Likes: 0
Received 0 Likes
on
0 Posts
Cheers mate what's in that point on the block at present or is it just a blank ?
Sorry for loads of questions mate but knowledge is power !
14 June 2012, 10:11 PM
Scooby Regular
Thread Starter
Join Date: Jan 2005
Location: never far away from my impreza
Posts: 7,843
Likes: 0
Received 0 Likes
on
0 Posts
Quote:
Originally Posted by
prodriverules
In your FPR Lee where you have your gauge you recently bought
So the guage under bonnet is of no use to me if I'm putting a guage inside !!
14 June 2012, 10:12 PM
Scooby Regular
Join Date: Jun 2010
Location: C+K MOTORS
Posts: 11,769
Likes: 0
No worries Lee,don't pick to hard mind
There is just a bung in the block at the moment mate,you will need an adapter for the sensor to fit into if you don't already have one.
14 June 2012, 10:12 PM
Scooby Regular
Join Date: Jun 2010
Location: C+K MOTORS
Posts: 11,769
Likes: 0
Quote:
Originally Posted by
leecalcars
So the guage under bonnet is of no use to me if I'm putting a guage inside !!
No use at all I'm afraid mate lol
14 June 2012, 10:23 PM
Scooby Regular
Thread Starter
Join Date: Jan 2005
Location: never far away from my impreza
Posts: 7,843
Likes: 0
Received 0 Likes
on
0 Posts
For sale then !! Cheers mate any idea what thread the adapter is ? Will the electrical sender not screw straight in then ?
14 June 2012, 10:26 PM
Scooby Regular
Join Date: Jun 2010
Location: C+K MOTORS
Posts: 11,769
Likes: 0
No the hole the bung is in is about twice the size of the sensor,you would best to get from Alan like the gauge mate,they are all the same size and he will know what you are after
17 June 2012, 07:01 PM
Scooby Regular
Thread Starter
Join Date: Jan 2005
Location: never far away from my impreza
Posts: 7,843
Likes: 0
Received 0 Likes
on
0 Posts
Cheers budy got oil temp sensor sender fitted had to tap out adapter to 1/8th npt
17 June 2012, 07:04 PM
Scooby Regular
Join Date: Jun 2010
Location: C+K MOTORS
Posts: 11,769
Likes: 0
Well done Lee,really the last few bits now then,I will be like a dog with 2 d!cks when I get mine just about ready
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Billet
ScoobyNet General
42
14 October 2015 10:38 PM
psport
Subaru Parts
3
04 October 2015 07:35 PM
Ganz1983
Subaru
5
02 October 2015 09:22 AM
timmy2take
Non Scooby Related
2
02 October 2015 08:09 AM
bugeyedom
General Technical
7
27 September 2015 07:24 PM