MAF Sensor
#1
MAF Sensor
Weird one.
I bought a V4 MAF sensor a while back, the part number checked out fine.
Just come to fit it and instead of the correct 2 pin black connector it has a 5 pin white one. I can only think that its been modified to fit another car with a weaker MAF?
What car uses a 5 pin white connector? I can get pics if needs be.
I bought a V4 MAF sensor a while back, the part number checked out fine.
Just come to fit it and instead of the correct 2 pin black connector it has a 5 pin white one. I can only think that its been modified to fit another car with a weaker MAF?
What car uses a 5 pin white connector? I can get pics if needs be.
Trending Topics
#9
Scooby Regular
Join Date: Apr 1999
Location: Surferk
Posts: 2,464
Likes: 0
Received 0 Likes
on
0 Posts
I think it should be a three pin as per these pics
http://www.rpmgarage.com/new/detail/?tid=19516
Oh annd V3/V4 WRX MAF's are Purple
V3/V4 Sti MAFs are Orange
http://www.rpmgarage.com/new/detail/?tid=19516
Oh annd V3/V4 WRX MAF's are Purple
V3/V4 Sti MAFs are Orange
Last edited by MarkCSC; 14 December 2011 at 11:56 AM.
#10
thats the first time ive seen one with 3 pins
i have 2 green, 1 orange and one purple maff and all have 5 pins (i think ive read somewhere the 5thpin isnt wired up tho)
sorry i cant help mate, might be worth while getting a pin out to see if it can be rewired to match you loom.
i have 2 green, 1 orange and one purple maff and all have 5 pins (i think ive read somewhere the 5thpin isnt wired up tho)
sorry i cant help mate, might be worth while getting a pin out to see if it can be rewired to match you loom.
#12
Scooby Regular
iTrader: (13)
You sure it's not a Nissan Z32 MAF? A 'common' replacement/upgrade for the MY97/98 (and MY93-96) cars, as it's physically the same size tube (80mm dia.)....? Does the code end in "...P00" (lol)?
Just a thought.
If so, you need the other side of the connector (obviously), with at least an inch or so of the 5 wires sticking out (called a "pigtail"). Then you can splice it into the OEM loom, and then get rescaled/remapped....
Just a thought.
If so, you need the other side of the connector (obviously), with at least an inch or so of the 5 wires sticking out (called a "pigtail"). Then you can splice it into the OEM loom, and then get rescaled/remapped....
Last edited by joz8968; 14 December 2011 at 10:22 PM.
#16
Scooby Regular
Join Date: Apr 1999
Location: Surferk
Posts: 2,464
Likes: 0
Received 0 Likes
on
0 Posts
or £353 if you go to Import car parts rather than flat4online
http://www.importcarparts.co.uk/part...en=&searchKey=
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM