mike h

iTrader: (10)

Painted them red and I'm going to paint the letters white.
What's your prefered technique for a tip top finish.

his-n-her-scoobs

iTrader: (5)

Sprayed paint onto a rubber ink roller then rolled it on when nearly dry. Worked fine for me, good luck

mike h

iTrader: (10)

Normal spray paint or high temp?

mit

iTrader: (10)

I just painted them by hand, but the above method sounds good!

tweaks

iTrader: (7)

used a little gloss roller on mine,spot on

sparky d

did mine with a foam radiator roller and gloss white appliance spray fella , comes up a treat ,

mike h

iTrader: (10)

Cheers guys, some good tips there.
I found some white enamel machine paint lurking in the cupboard at work so will have a go in the week.

JonMc

iTrader: (51)

I bought some stickers that where the right size

tarmac terror

iTrader: (2)

Painted my calipers with bronze hammerite and black hammerite letters.

Lightly painted the black hammerite onto a bog roll tube and rolled it across the letters. Waited for it to dry then gave a second coat.

Worked well and 12 months later still looks well.

mike h

iTrader: (10)

Bog roll! well done that man!
I've been thinking what i could use as a roller without actually buying one.
I like you style.

99greenwagon

iTrader: (39)

now that is a classic,wouldnt have thought of that one!

mike h

iTrader: (10)

Well, after much deliberation I decided to make my own device as i couldn't be arsed to take the wheels off again!



A nifty little dabber!

Have a look at this thread for the final result:https://www.scoobynet.com/members-ga...ml#post8640667