Bob and his magic! Best mapper...
#1
Scooby Regular
Thread Starter
Join Date: Jun 2006
Location: South West
Posts: 1,568
Likes: 0
Received 0 Likes
on
0 Posts
Bob and his magic! Best mapper...
Well, what can I say except thank you thank you thank you BOB!
He's just finished the setup of my AVC-R and gained me a further 5 bhp and 22 ft/lb of torque (think that's the right figures, waiting for the graph) and its earlier in the rev range which is mint.
Car goes like **** and power slides (as a biker on a big cc bike found out on the way back to Bob's! lol )...EGT's are around 830-860 mark , engine no longer smells at all hot and even the intercooler pipe just before the inlet manifold is cool to touch after a proper burn (thanks partly to water injection I guess).
Just need to sort out a different actuator for my hybrid turbo now as the existing one from lateral opens at .7 bar and Bob recommends 1.2 bar to open...this will improve things still and reduce the boost drop from 6,000+ rpm - Boy does Bob know his stuff.
He's just finished the setup of my AVC-R and gained me a further 5 bhp and 22 ft/lb of torque (think that's the right figures, waiting for the graph) and its earlier in the rev range which is mint.
Car goes like **** and power slides (as a biker on a big cc bike found out on the way back to Bob's! lol )...EGT's are around 830-860 mark , engine no longer smells at all hot and even the intercooler pipe just before the inlet manifold is cool to touch after a proper burn (thanks partly to water injection I guess).
Just need to sort out a different actuator for my hybrid turbo now as the existing one from lateral opens at .7 bar and Bob recommends 1.2 bar to open...this will improve things still and reduce the boost drop from 6,000+ rpm - Boy does Bob know his stuff.
#4
Scooby Regular
Join Date: Dec 2006
Location: Milf Heaven
Posts: 1,429
Likes: 0
Received 0 Likes
on
0 Posts
#7
Scooby Regular
Thread Starter
Join Date: Jun 2006
Location: South West
Posts: 1,568
Likes: 0
Received 0 Likes
on
0 Posts
Mark at Lateral is sorting a replacement actuator..cheers mark
Bob's then going to do a tweak on the AVC-R and I'll post the results early June...Bob's so in demand its crazy!
Bob's then going to do a tweak on the AVC-R and I'll post the results early June...Bob's so in demand its crazy!
Trending Topics
#9
Scooby Regular
Thread Starter
Join Date: Jun 2006
Location: South West
Posts: 1,568
Likes: 0
Received 0 Likes
on
0 Posts
Hi Monkeysan,
Its a black art m8, I only understand half of what Bob (my magic mapper) did...He set it for in gear learning, then set gears to static engine revs for all 5 (6th runs the same as 5th) - you'll need two in the car to do this safely.
He then setup duty for each gear and max boost settings, plus lots of other bits which looked good on screen lol. The duty settings is key and Bob also sorted a problem with boost fluctuation on full chat but not sure how he did that. Best speak with bob at BR developments as setup is decent price with him.
Its a black art m8, I only understand half of what Bob (my magic mapper) did...He set it for in gear learning, then set gears to static engine revs for all 5 (6th runs the same as 5th) - you'll need two in the car to do this safely.
He then setup duty for each gear and max boost settings, plus lots of other bits which looked good on screen lol. The duty settings is key and Bob also sorted a problem with boost fluctuation on full chat but not sure how he did that. Best speak with bob at BR developments as setup is decent price with him.
Thread
Thread Starter
Forum
Replies
Last Post
ATWRX
Full Cars Breaking For Spares
88
01 February 2016 07:28 PM
Ravimal3
General Technical
9
22 September 2015 06:44 AM