Slow Gear Change through hard acceleration
#1
I'm not sure if this is my car, subaru's or typical of all turbo cars.
Through hard acceleration, up to rpm of say 6,500, car is super until rapid gear change where:
Depressing the clutch pedal, next gear is selected, and pedal released. If the gear change is executed with speed, and the clutch released, you beat the decrease of the rpm of the engine and expereince a lurch forward as clutch engages new gear, hence slowing the rpm artifically to meet the rpm of tranmission/gear selected.
I am finding that for fast/hard acceleration, I have to apply a " HGV" style slow gear change as I allow the rpm of the engine to lower sufficiently to stop the horrible lurching that can happen.
Is this a problem with the engine, or is it typical of the scoob - i.e. having to wait for turbo boost to lower, and rpm to lower???
I have never owned a turbo powered performance vehicle before, and apologies if this is typical engine behaviour! However, I desire speed now after driving a number of diesel powered sloaths for years!
If all sounds well, and typical of a scoob then that's fine, I just know to change gear slowly and gracefully, and not to worry too much when the tiptronic 911 catches me up :-0
Seems like i can fly through a gear to top rpm, and then loose pace for a couple of seconds through the next gear change for engine rpm to lower... seem a little odd me?
The car is a standard MY99 Wagon.
Thanks in advance
Spadds
Through hard acceleration, up to rpm of say 6,500, car is super until rapid gear change where:
Depressing the clutch pedal, next gear is selected, and pedal released. If the gear change is executed with speed, and the clutch released, you beat the decrease of the rpm of the engine and expereince a lurch forward as clutch engages new gear, hence slowing the rpm artifically to meet the rpm of tranmission/gear selected.
I am finding that for fast/hard acceleration, I have to apply a " HGV" style slow gear change as I allow the rpm of the engine to lower sufficiently to stop the horrible lurching that can happen.
Is this a problem with the engine, or is it typical of the scoob - i.e. having to wait for turbo boost to lower, and rpm to lower???
I have never owned a turbo powered performance vehicle before, and apologies if this is typical engine behaviour! However, I desire speed now after driving a number of diesel powered sloaths for years!
If all sounds well, and typical of a scoob then that's fine, I just know to change gear slowly and gracefully, and not to worry too much when the tiptronic 911 catches me up :-0
Seems like i can fly through a gear to top rpm, and then loose pace for a couple of seconds through the next gear change for engine rpm to lower... seem a little odd me?
The car is a standard MY99 Wagon.
Thanks in advance
Spadds
#5
Sounds to me that the baulk rings between the synchro hub have "polished". I appreciate it does mean a removal of the gearbox to sort, but once they have been "cleaned", it should be ok again.
When I mean "cleaned", the drive surfaces have to be flatted with some "wet n dry" paper, sop they have a "matt" appearence, similar to the effect on an engine valve.
"they all do it" simply is not true. i'd normally hear that from a Dealer!
When I mean "cleaned", the drive surfaces have to be flatted with some "wet n dry" paper, sop they have a "matt" appearence, similar to the effect on an engine valve.
"they all do it" simply is not true. i'd normally hear that from a Dealer!
#7
Scooby Regular
Join Date: Apr 2003
Location: South Bucks
Posts: 3,213
Likes: 0
Received 0 Likes
on
0 Posts
Mine does it....by it I mean that I lose boost/power in the immediate aftermath of a gearchange.
The best way I have found to avoid it is to push the clutch pedal fractionally before coming off the throttle so the engine revs momentarily rise/peak (not to the rev. limiter though).
I find that gradually coming off the throttle before a gear change results in the scoob thinking I don't want to go fast anymore :-(
Vindaloo.
The best way I have found to avoid it is to push the clutch pedal fractionally before coming off the throttle so the engine revs momentarily rise/peak (not to the rev. limiter though).
I find that gradually coming off the throttle before a gear change results in the scoob thinking I don't want to go fast anymore :-(
Vindaloo.
Trending Topics
#8
Scooby Regular
Join Date: Aug 2012
Location: Wiltshire
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
My new p1
Not sure how to post to main thread on here as im new to this. Today after much consideration i went and bought myself a p1. Car looked great on arrival and after a inspection. Anyway on the m5 home i give some beans and the clutch pedal takes ages to come up after changing gear. why is this???? never had this with my sti verson 2 and 3. also on a hill i was pushing it and seemed momentarily flat and like no power there. Absolutely gutted as p asked for my money back but he has refused.
Any help would be gratefully appreciated. In time i will have this p1 running good again .. hopefully.
sean
Any help would be gratefully appreciated. In time i will have this p1 running good again .. hopefully.
sean
#9
Scooby Regular
Join Date: Aug 2012
Location: Wiltshire
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
If any1 has a p1 could they private message me please. I need your knowledge so i can sort my new 1 which i purchased today. thanks . any help appreciated.
problems...1. clutch slow coming back up when driving fast but ok slow round the town.
2. flat spot at 90 going up a hill ?
problems...1. clutch slow coming back up when driving fast but ok slow round the town.
2. flat spot at 90 going up a hill ?
#11
Scooby Regular
iTrader: (8)
Mine does it....by it I mean that I lose boost/power in the immediate aftermath of a gearchange.
The best way I have found to avoid it is to push the clutch pedal fractionally before coming off the throttle so the engine revs momentarily rise/peak (not to the rev. limiter though).
I find that gradually coming off the throttle before a gear change results in the scoob thinking I don't want to go fast anymore :-(
Vindaloo.
The best way I have found to avoid it is to push the clutch pedal fractionally before coming off the throttle so the engine revs momentarily rise/peak (not to the rev. limiter though).
I find that gradually coming off the throttle before a gear change results in the scoob thinking I don't want to go fast anymore :-(
Vindaloo.
Cheers Vindaloo!
#12
Scooby Regular
Join Date: Aug 2012
Location: Wiltshire
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
clutch and flat spot problem
I will get a mechanic to try that on tuesday as i dont have a clue how do blled a clutch . It had a rebuild and advanced automotive in bristol 2009 and so i was hoping car would be clean. once i got home everything electrical down also. all working now apart from gauges. should be driving it now : ( thanks for replying mate . the guy i got it from is refussing refund so ill set about sorting it.. gradually
Thread
Thread Starter
Forum
Replies
Last Post