Start and stop button issue on Subaru impreza 2010 EJ25 on Haltech Elite 2500
#1
Scooby Newbie
Thread Starter
Start and stop button issue on Subaru impreza 2010 EJ25 on Haltech Elite 2500
g
Hi everybody,
I'm Michele from Belgium,new here on Scooby net and thank you all for accepting me!
This is the first time that I work with Haltech stuff,and I have installed a 2500 elite ecu on a Subaru impreza 2010 STI EJ25.
I'm struggeling with the start/stop engine button and the clucth starting function(keyless).
The car start like a charm and I'm ready to tune the map on the road .
My concern is:
- when the engine is running and every time that I engage the clucth, the starter is activated like in the starting procedure and hit the flywheel.Regarding this, it's impossible for to me to put the first gear and drive the car.
I've put a switch on the starter solenoid wire to make the car running and tune but It's not the final solution and I really need help to solve this.....
Hope someone already had that issue and give me some advice.
Thanks in advance guys.
Michele from Belgium
Hi everybody,
I'm Michele from Belgium,new here on Scooby net and thank you all for accepting me!
This is the first time that I work with Haltech stuff,and I have installed a 2500 elite ecu on a Subaru impreza 2010 STI EJ25.
I'm struggeling with the start/stop engine button and the clucth starting function(keyless).
The car start like a charm and I'm ready to tune the map on the road .
My concern is:
- when the engine is running and every time that I engage the clucth, the starter is activated like in the starting procedure and hit the flywheel.Regarding this, it's impossible for to me to put the first gear and drive the car.
I've put a switch on the starter solenoid wire to make the car running and tune but It's not the final solution and I really need help to solve this.....
Hope someone already had that issue and give me some advice.
Thanks in advance guys.
Michele from Belgium
#2
Scooby Regular
Have you spoken to/contacted Haltech?
Attached are the 4 pdf's covering the MY10 LHD push to start button system showing links to ECU
Attached are the 4 pdf's covering the MY10 LHD push to start button system showing links to ECU
Last edited by Don Clark; 02 March 2021 at 01:25 PM.
#3
Scooby Newbie
Thread Starter
Hi,
Thanks a lot for your answer,these PDF are very helpfull for me to understand the wiring.It seem that the Haltech plug and play harness need to add some wires and doing some mod's to make it work correctly..... I 've send a message to Haltech support and I still not received an answer.
Thanks a lot!! I really apreciate....
Thanks a lot for your answer,these PDF are very helpfull for me to understand the wiring.It seem that the Haltech plug and play harness need to add some wires and doing some mod's to make it work correctly..... I 've send a message to Haltech support and I still not received an answer.
Thanks a lot!! I really apreciate....
The following users liked this post:
Thread
Thread Starter
Forum
Replies
Last Post