WHAT KIND OF POWER WOULD YA SAY???
#1
Scooby Regular
Thread Starter
Join Date: Dec 2006
Location: London
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
WHAT KIND OF POWER WOULD YA SAY???
hi all
my type R is goin in for a dyno session next week at TDi (Essex)
how much power do you lot think ill be gettin with this set-up and supporting mods???
engine and running gear spec:
Engine rebuild end of May 2006 using STI 9 Crank and Rods.
Under 5000miles on new engine…just undergone run in period.
VF29 Turbo roller bearing turbo
Massive APS Front Mount Intercooler
Apexi Power FC+commander system fitted and mapped By Andy Forrest
K&N Air Filter with Custom Carbon Fibre Heat Shield and Cold Air Feed
Fuel Labs Fuel Pressure Regulator
Walbro Motorsport Fuel Pump
Revolution 3” Downpipe
Performance decatted exhaust
Externally venting screamer
Exedy Lightened Flywheel (Approx. 5 Kgs)
Exedy Organic Racing Clutch (twin plate)
Super light F1 OZ 18’s
Samco Silicon Cooling Hose Kit
Forge Recirc blow-off valve
Engine bay visual
my type R is goin in for a dyno session next week at TDi (Essex)
how much power do you lot think ill be gettin with this set-up and supporting mods???
engine and running gear spec:
Engine rebuild end of May 2006 using STI 9 Crank and Rods.
Under 5000miles on new engine…just undergone run in period.
VF29 Turbo roller bearing turbo
Massive APS Front Mount Intercooler
Apexi Power FC+commander system fitted and mapped By Andy Forrest
K&N Air Filter with Custom Carbon Fibre Heat Shield and Cold Air Feed
Fuel Labs Fuel Pressure Regulator
Walbro Motorsport Fuel Pump
Revolution 3” Downpipe
Performance decatted exhaust
Externally venting screamer
Exedy Lightened Flywheel (Approx. 5 Kgs)
Exedy Organic Racing Clutch (twin plate)
Super light F1 OZ 18’s
Samco Silicon Cooling Hose Kit
Forge Recirc blow-off valve
Engine bay visual
#4
Scooby Regular
Thread Starter
Join Date: Dec 2006
Location: London
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
#6
Scooby Regular
Thread Starter
Join Date: Dec 2006
Location: London
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
na m8, its not a blow off valve...its actually a pipe thats connected to the turbo and is supposed to vent back into the system...but is venting externally
try some of these...my pc speakers aint workin at the mo so leme know if you get the idea lol
YouTube - Broadcast Yourself.
try some of these...my pc speakers aint workin at the mo so leme know if you get the idea lol
YouTube - Broadcast Yourself.
Last edited by prince_of_tokyo; 15 February 2007 at 03:48 PM.
Trending Topics
#9
Scooby Regular
iTrader: (41)
Join Date: Nov 2003
Location: in the woods...........555 Wagon Sqn
Posts: 13,347
Received 55 Likes
on
42 Posts
maybe a screamer has something in the trumpet that makes the 'screaming' noise?
#12
Scooby Regular
iTrader: (1)
Join Date: Jan 2006
Location: Barnsley
Posts: 1,006
Likes: 0
Received 0 Likes
on
0 Posts
If it's on standard injectors (440's) and that turbo the max power will be approx 340, but it will all depend on the RR/ambient temp etc.
Thats a brilliant spec, enjoy the car mate, don't worry about the numbers
Damo
Thats a brilliant spec, enjoy the car mate, don't worry about the numbers
Damo
#14
Scooby Regular
Thread Starter
Join Date: Dec 2006
Location: London
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
sorry m8, just got the emails now...you can buy a proper one from ebay etc...or you could have a diy job done...not sure how its done myself but its some pipe that vents back into the turbo/exhaust turbo which instead of going back in is vented to atmosphere (something also to do with the wastegate)
#15
Scooby Regular
Thread Starter
Join Date: Dec 2006
Location: London
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
btw peeps...do you reckon itll be better if i change the red APS intercooler hardpipes for metal ones??? as i reckon on boost they expand causing more lag???
#17
Scooby Regular
Thread Starter
Join Date: Dec 2006
Location: London
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
i didnt get mine of ebay m8, it was on the car...my m8 has an awesome one on his rx7, ill have a little word with him 2moro and get full instructions on what to do because he done his one him self...ill pm u bud
#20
Moderator
iTrader: (4)
Join Date: Jul 2004
Location: The Terry Crews of moderation. P P P P P P POWER!!
Posts: 18,687
Likes: 0
Received 0 Likes
on
0 Posts
hi all
my type R is goin in for a dyno session next week at TDi (Essex)
how much power do you lot think ill be gettin with this set-up and supporting mods???
engine and running gear spec:
Engine rebuild end of May 2006 using STI 9 Crank and Rods.
Under 5000miles on new engine…just undergone run in period.
VF29 Turbo roller bearing turbo
Massive APS Front Mount Intercooler
Apexi Power FC+commander system fitted and mapped By Andy Forrest
K&N Air Filter with Custom Carbon Fibre Heat Shield and Cold Air Feed
Fuel Labs Fuel Pressure Regulator
Walbro Motorsport Fuel Pump
Revolution 3” Downpipe
Performance decatted exhaust
Externally venting screamer
Exedy Lightened Flywheel (Approx. 5 Kgs)
Exedy Organic Racing Clutch (twin plate)
Super light F1 OZ 18’s
Samco Silicon Cooling Hose Kit
Forge Recirc blow-off valve
Engine bay visual
my type R is goin in for a dyno session next week at TDi (Essex)
how much power do you lot think ill be gettin with this set-up and supporting mods???
engine and running gear spec:
Engine rebuild end of May 2006 using STI 9 Crank and Rods.
Under 5000miles on new engine…just undergone run in period.
VF29 Turbo roller bearing turbo
Massive APS Front Mount Intercooler
Apexi Power FC+commander system fitted and mapped By Andy Forrest
K&N Air Filter with Custom Carbon Fibre Heat Shield and Cold Air Feed
Fuel Labs Fuel Pressure Regulator
Walbro Motorsport Fuel Pump
Revolution 3” Downpipe
Performance decatted exhaust
Externally venting screamer
Exedy Lightened Flywheel (Approx. 5 Kgs)
Exedy Organic Racing Clutch (twin plate)
Super light F1 OZ 18’s
Samco Silicon Cooling Hose Kit
Forge Recirc blow-off valve
Engine bay visual
Who does the mapping at TDI? That's the most important bit in getting the result you want
Ns04
#22
Scooby Regular
Thread Starter
Join Date: Dec 2006
Location: London
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
just got my car booked in at POWER ENGINEERING 2day instead for sat 3rd MARCH ...about £52...TDi said £160 for a straight forward power run lol
ill be posting the results
ill be posting the results
Thread
Thread Starter
Forum
Replies
Last Post