|
WHAT KIND OF POWER WOULD YA SAY???
hi all
my type R is goin in for a dyno session next week at TDi (Essex) how much power do you lot think ill be gettin with this set-up and supporting mods??? engine and running gear spec: Engine rebuild end of May 2006 using STI 9 Crank and Rods. Under 5000miles on new engine…just undergone run in period. VF29 Turbo roller bearing turbo Massive APS Front Mount Intercooler Apexi Power FC+commander system fitted and mapped By Andy Forrest K&N Air Filter with Custom Carbon Fibre Heat Shield and Cold Air Feed Fuel Labs Fuel Pressure Regulator Walbro Motorsport Fuel Pump Revolution 3” Downpipe Performance decatted exhaust Externally venting screamer Exedy Lightened Flywheel (Approx. 5 Kgs) Exedy Organic Racing Clutch (twin plate) Super light F1 OZ 18’s Samco Silicon Cooling Hose Kit Forge Recirc blow-off valve Engine bay visual http://i137.photobucket.com/albums/q...yenginebay.jpg :thumb: |
What's a "Externally venting screamer"?:confused:
|
would have thought about a realistic 300bhp
|
Originally Posted by Molds
(Post 6660522)
What's a "Externally venting screamer"?:confused:
a screamer pipe??? instead of going back into the exhaust/turbo system, it vents externally and screams like a f*cker when on boost |
Originally Posted by prince_of_tokyo
(Post 6661471)
a screamer pipe??? instead of going back into the exhaust/turbo system, it vents externally and screams like a f*cker when on boost
depending on injectors maybe 330\330 |
na m8, its not a blow off valve...its actually a pipe thats connected to the turbo and is supposed to vent back into the system...but is venting externally
try some of these...my pc speakers aint workin at the mo so leme know if you get the idea lol YouTube - Broadcast Yourself. |
Originally Posted by trails
(Post 6661474)
oh you mean a vta...
depending on injectors maybe 330\330 |
I'd guess a bit more than 330.
Still not sure the diff between a vta dump valve setup to re circ and a "screamer"? |
Originally Posted by Molds
(Post 6661559)
I'd guess a bit more than 330.
Still not sure the diff between a vta dump valve setup to re circ and a "screamer"? maybe a screamer has something in the trumpet that makes the 'screaming' noise? |
My guess 350
|
348 is my guess
|
If it's on standard injectors (440's) and that turbo the max power will be approx 340, but it will all depend on the RR/ambient temp etc.
Thats a brilliant spec, enjoy the car mate, don't worry about the numbers:thumb: Damo |
prince your pm box is full!! where do you get a screamer pipe from think they sound awesome.
|
Originally Posted by typerchris
(Post 6662601)
prince your pm box is full!! where do you get a screamer pipe from think they sound awesome.
|
btw peeps...do you reckon itll be better if i change the red APS intercooler hardpipes for metal ones??? as i reckon on boost they expand causing more lag???
|
looked on ebay do you have the sellers i'd where you got yours from think it will sound awesome
|
i didnt get mine of ebay m8, it was on the car...my m8 has an awesome one on his rx7, ill have a little word with him 2moro and get full instructions on what to do because he done his one him self...ill pm u bud
|
not my car...but this is what the external wastegate and screamer pipe set up look like on a scoob
http://i34.photobucket.com/albums/d1...x/PICT0533.jpg hope this helps |
my car has a vf23 on so would this still be possible
|
Originally Posted by prince_of_tokyo
(Post 6660486)
hi all
my type R is goin in for a dyno session next week at TDi (Essex) how much power do you lot think ill be gettin with this set-up and supporting mods??? engine and running gear spec: Engine rebuild end of May 2006 using STI 9 Crank and Rods. Under 5000miles on new engine…just undergone run in period. VF29 Turbo roller bearing turbo Massive APS Front Mount Intercooler Apexi Power FC+commander system fitted and mapped By Andy Forrest K&N Air Filter with Custom Carbon Fibre Heat Shield and Cold Air Feed Fuel Labs Fuel Pressure Regulator Walbro Motorsport Fuel Pump Revolution 3” Downpipe Performance decatted exhaust Externally venting screamer Exedy Lightened Flywheel (Approx. 5 Kgs) Exedy Organic Racing Clutch (twin plate) Super light F1 OZ 18’s Samco Silicon Cooling Hose Kit Forge Recirc blow-off valve Engine bay visual http://i137.photobucket.com/albums/q...yenginebay.jpg :thumb: Who does the mapping at TDI? That's the most important bit in getting the result you want Ns04 |
Screamer pipe comes off the external wastegate.
|
just got my car booked in at POWER ENGINEERING 2day instead for sat 3rd MARCH :) ...about £52...TDi said £160 for a straight forward power run lol
ill be posting the results :thumb: |
| All times are GMT +1. The time now is 04:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands