going to finaly get a tek 3 remap on my 99 uk so far i've got a magnex system (downpipe,straight through centre and backbox) and a green panel filter is there anything else i need to do before i get it done looking for around about 280-290bhp

 

Have a MY99 with TEK 2 remap, same mods as you so far, plus an equal length header from Powerstation. 276bhp + 290 lb.ft torque. when remap was done.

 

did you notice the difference graham

 

get a td05 on there as well,
along with a fuel pump and regulator.
should see you past 300brake without too many problems for not a lot extra expenditure

 

Stevey,

Yes the difference was highly noticable. The torque value I would put down to these headers in particular. I do like the odd pie, so the torque is more important than the bhp for me.
I have since fitted an uprated fuel pump and am hoping Santa will bring me a new turbo and pressure regulator for x-mas?

Cheers,

Graham

 

Im sure you already have but boost gauge and Knocklink ... then plugs and Samco turbo hoses.

Gary

 

lb4 yeah got them all bar the plugs which i'm waiting for

 

get a tek3 (ie customised) map from Bob Rawle..... he's very good and knowledgable