tek3
going to finaly get a tek 3 remap on my 99 uk so far i've got a magnex system (downpipe,straight through centre and backbox) and a green panel filter is there anything else i need to do before i get it done looking for around about 280-290bhp
|
Have a MY99 with TEK 2 remap, same mods as you so far, plus an equal length header from Powerstation. 276bhp + 290 lb.ft torque. when remap was done.
|
did you notice the difference graham
|
get a td05 on there as well,
along with a fuel pump and regulator. should see you past 300brake without too many problems for not a lot extra expenditure :cool: |
Stevey,
Yes the difference was highly noticable. The torque value I would put down to these headers in particular. I do like the odd pie, so the torque is more important than the bhp for me. I have since fitted an uprated fuel pump and am hoping Santa will bring me a new turbo and pressure regulator for x-mas? Cheers, Graham |
Im sure you already have but boost gauge and Knocklink ... then plugs and Samco turbo hoses.
Gary |
lb4 yeah got them all bar the plugs which i'm waiting for
|
get a tek3 (ie customised) map from Bob Rawle..... he's very good and knowledgable
|
All times are GMT +1. The time now is 09:18 PM. |
© 2024 MH Sub I, LLC dba Internet Brands