hendy

help me please just fitted the dawes device went for a run boost was 0.4 so stoped ajusted it then went for a run and it was 0.7 stoped ajusted it again went for a run 1.0 bar great continued on the run all ov a sudden it just dropped to 0.5 and will not go up any more the dawes device is screwed up tight and the engine cheack light comes on when you foot is off the gas and as soon as you put your foot back on the gas it goes off again please help grant

Dyney

Have you tried puting the std hoses back on?
What was the effect?

Try an ECU reset to clear any fault codes and see if it does it still How to reset the ECU

Iain.

jonny gav

iTrader: (1)

what is the MY of your car???

hendy

it is a my 92 wrx import

Rich Tee

sounds as though you have overboosted and the ECU has gone into "safe mode", r u using a knocklink or AFR, as possible it was detting and thats why the ECU cut it, run ECU check codes and try a reset would be my thoughts.

R

Chod

Sounds like you have a split pipe or similar. The ECU should not be able to control the boost if you are using the dawes instead of the boost solenoid.

Jay m A

iTrader: (2)

I agree with chod, check all your pipes.

hendy

ok will do thanks for your help grant

john banks

And get a knocklink anyway unless you want a rebuild.

hendy

tryed to reset the ecu but wont reset still shows the code 45 boost solinoid not connected to nothing did ent have any fuel cuts or nothing

hendy

best place to get one and how much ish cheers grant