Unsure now my mate dave is saying it looks like a ford ST !!!!!!!

 

Cheers Tony, car gets picked up by custom cages today Gpn roll cage being installed after that interior spray then I can start putting it all back together, if there's anything you might need just let me know bud il do my best as it's only gathering dust down the garage lol

 

I liked this design, but its your call.

Hmmmmm....
Its look nothing like the ST's I have seen

The ST stripes are two bland equal (around 45mm stripes) down the side in one colour. I would say they are more like the Gobstopper, and as its on a Subaru..... .....

Another blend of the two designs:



Rob

 

Yes yes yes !!!!!!

 

Going away



Going



Gone



Thats it now for a few weeks would like to get it back ready for painting this easter break but cant see it will just have to wait a while.

 

Definatley won't get the car back for paint till atleast 1st week in may,CC have told me il get a call from them with a finish date this week .

 

still no call from them with a specific date so il just have to sit tight and look for more parts !

 

Got the swirlpot just need the fuel lines and bosch 044 ext pump

 

Sold my oz supperleggras and need to get some 18's that fit over my k sports as I can get hold of slicks pretty easy.

Still not a word from CC yet so not sure when i'l get it back

 

Not many 18's in favorable sizes for an Impreza, Well not without significant arch work or a car on stilts. LOL

 

rolling the arches mate or even cutting them back to fit extension arches not sure yet,probebly the latter.

 

Another item out the way external fuel pump bracket to hold bosch 044 fuel pump

 

my old wrx that i should have kept, cars looking good mate j

 

cheers who did your graphics?

 

Another must have item bought WRC baffled sump

 

How about you don't get the graphics and keep it stealth? Great project, I love it.

 

Cheers mate , think I'm like a women in a shoe shop when it comes to buying parts just can't stop myself ! Lol

Things will start to happen once I get the car back , just a case of gathering parts and information while I have the time, the best bits are to come putting it all back together again .

 

Finally got hold of a bosch 044 fuel pump just need the 6 + 8mm braided fuel lines and AN fittings .

Still no call from Custom Cages as to when il get my car back !!!

 

Finally got the call from Custom Cages as to delivery date back to me ,after a 30 min conversation with Marcel, who explained the process of receiving car to making cage to fit (bespoke) to completion.
It has put my mind at rest and am really happy with the final job even though i want the door cross over fillets as an extra so will have to wait till the 26th to get it back but il leave the pictures speak for itself ,just need to get it painted in the next few weeks.

 

just need to measure fuel lines and get them made

 

That cage looks awesome Lee,if you don't mind me asking,how much is it?
I assume you will be getting the inside painted also?

 

Yes Ryan im well pleased with it, and by the pictures they have sent me you can see the extra box sections near the base of the rear seats are spot on.

All in all with delivery and pick up supply and fit the cage was 2.5k cant wait to get it painted in white think it will look and do the job needed.

 

nice mate i will be watching this

 

As i have had my flocked dash for a while now i thought i would get it ready for install,firstly cleaned off all the excess flock dust then i drilled a 60mm hole into bottom of cubby box to easily feed guage wiring through.

Then was the removel off the passenger airbag from the flocked cover to save weight and to remove the airbag as it wont be needed anymore, this was a bit tricky as we had to drill out the pot rivets holding the unit to the plastic cover.
with the use of my mates dave's dremmel this was quite easy thanks mate.

 

 

 

Need to get a peice of carbon sheet to make a back plate for switches and fuses to fit where centre consol used to be.

Also front splitter to make and fit to front bumper loads to do gonna be busy this summer.

 

Looking good Lee,looking forward to seeing this done mate as I'm sure you are

 

Me too Ryan,still a bit to go yet but as soon as i get it back its going in for paint decided on white instead of silver.

 

I'm glad my car's going away this weekend otherwise I might get some more wild ideas, and I know Ryan wouldn't like that