Drive Shaft issue
#1
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: May 2002
Location: Swansea
Posts: 2,072
Likes: 0
Received 0 Likes
on
0 Posts
Drive Shaft issue
I'm currently fitting a 6 speed conversion but we've hit a snag with the rear shafts
The shafts with the R180 diff dont mate to the P1 hub's
Do i need to fit newage rear hubs or are there other shafts available ?
The shafts with the R180 diff dont mate to the P1 hub's
Do i need to fit newage rear hubs or are there other shafts available ?
#2
Scooby Regular
iTrader: (4)
Join Date: Jun 2005
Location: South Wales, Scoobless, Type R is gone!
Posts: 3,618
Likes: 0
Received 0 Likes
on
0 Posts
Yeap to run a newage rear diff u need either Newage hubs or hubs off a type R that had an R180 rear diff.
The other option is just leave the standard R160 rear diff setup on the car with the 6 speed box which is what i did.
The other option is just leave the standard R160 rear diff setup on the car with the 6 speed box which is what i did.
#3
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: May 2002
Location: Swansea
Posts: 2,072
Likes: 0
Received 0 Likes
on
0 Posts
i've gone through 4 standard rear diff's already mate
The R180 is already fitted so just need to sort out the Hub's
The R180 is already fitted so just need to sort out the Hub's
Last edited by scoobyp1; 12 February 2010 at 09:44 AM.
#4
Scooby Senior
iTrader: (12)
Join Date: Apr 2006
Location: south wales rhondda
Posts: 4,067
Likes: 0
Received 0 Likes
on
0 Posts
make sure they are not the different stud pattern or you will need newage wheels on back and classic fit on the front
how did yolu go through so many diffs ??? they must not be the right ratio to your box you had to go through so many? what power was it running as i thought a p1 box and diff was alot better than standard uk or wrx
how did yolu go through so many diffs ??? they must not be the right ratio to your box you had to go through so many? what power was it running as i thought a p1 box and diff was alot better than standard uk or wrx
Last edited by The Stitcher; 12 February 2010 at 01:40 PM.
#5
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: May 2002
Location: Swansea
Posts: 2,072
Likes: 0
Received 0 Likes
on
0 Posts
All the right ratios Diff's, over enthusiastic driving maybe....
Think there is only one type of diff for the P1
I've been offered newage hubs and reaer brembo's but i just need to check with garage now about the PCD
Think there is only one type of diff for the P1
I've been offered newage hubs and reaer brembo's but i just need to check with garage now about the PCD
Trending Topics
#9
THE braking specialist
iTrader: (259)
yes up to 2004 the STi stud pattern is the same as a classic , after 2005 they changed to 5 x 114mm
The sti hubs will fit onto your car , but your standard P1 brakes wont then fit , you will need the Type R or 2001 onwards sti rear brakes
Cheers Ian
The sti hubs will fit onto your car , but your standard P1 brakes wont then fit , you will need the Type R or 2001 onwards sti rear brakes
Cheers Ian
Last edited by Godspeed Brakes; 14 February 2010 at 05:32 PM.
Thread
Thread Starter
Forum
Replies
Last Post