scooby_Paul

Well im finally getting round to de-tangoing my front lights today. Got the lights out no problem, hardest bit is seperating them but did this eventually with a heat gun. Im just letting the primer dry on the surround as im writing this before i give it a coat of satin black. Will update with pics later . Oh and as the lights the lights are out i thought id bang in a set of 4300k xenons and chrome indicator bulbs

ScoobySteve69

iTrader: (13)

Tidy One of the best mods anyone can do imo.

Dan-

I'm buying myself i set of lights so i can try this, i havnt got the b**s to do it to my main lights, the amount of times I've tried practising with a heat gun on my old 206 lights they just wouldn't separate and the only time I've been susessful in the over was with glass lens

fawor

iTrader: (3)

70degree oven,15-20 min, done ,easy

Dan-

Thanks for that! The other problem I also have is re-sealing as I'm such a perfectionist it has to be neat, I used butyl tape on the ones I did before and that let condenstation in

bustaMOVEs

iTrader: (31)

Easier in the oven, but all the time depends on what oven it is elec or gas.
My elec fan oven only took about 4 mins to soften glue.

bustaMOVEs

iTrader: (31)

Back in oven for reseal so the old glue can soften back up for easy fit again and then get some extra glue from shop and go round it again for airtight seal. No condensation.

tubbytommy

iTrader: (20)

use a hot air gun its easier! then heat up and hold together for a couple of minutes to avoid moisture in the lense at a later date

scooby_Paul

well ive finished and i must admit it looks a hell of a lot better. The time and patience really does pay off. Glad ive done it now and wasnt as bad as i thought it would be Recomend it to any blob owner. Will add the photos tomorrow as its bouncing it down at the min

BaV

iTrader: (1)

Did you do them in the oven or with a heat gun? Did you follow a guide? I can't seem to find one on here.

Cheers

tubbytommy

iTrader: (20)

i have done a few and heat gun is easier and safer in my opinion, but you can use the oven