remaping my 94 wrx
01 February 2010, 03:14 PM
#1
Scooby Regular
Thread Starter
Join Date: Nov 2009
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
remaping my 94 wrx
Subaru Impreza 1993 WRX import now on a private plate
taxed to feb 10, engine runs fine, also gearbox & diffs fine
magnex centre pipe & backbox
HKS filter & Dump valve
Uprated fuel pump
Fuel reg
Nitrous single fogger 25HP & purge kit
intercooler spray home made
Drilled & grooved discs all round with new pads
STI strut brace
OMP suede steering wheel
Harness driver only
push button start
shift light
turbo timer
Cd player
short shift
Bad points
no mot
bonnet damaged
needs new screen.
117000 mls cambelt changed 110000 mls
where is the best place to go and what sort of prices and also what sort of power gains chears
taxed to feb 10, engine runs fine, also gearbox & diffs fine
magnex centre pipe & backbox
HKS filter & Dump valve
Uprated fuel pump
Fuel reg
Nitrous single fogger 25HP & purge kit
intercooler spray home made
Drilled & grooved discs all round with new pads
STI strut brace
OMP suede steering wheel
Harness driver only
push button start
shift light
turbo timer
Cd player
short shift
Bad points
no mot
bonnet damaged
needs new screen.
117000 mls cambelt changed 110000 mls
where is the best place to go and what sort of prices and also what sort of power gains chears
01 February 2010, 03:39 PM
#2
Scooby Regular
Join Date: Aug 2006
Posts: 3,214
Likes: 0
Received 0 Likes
on
0 Posts
300bhp absolute max with the standard 380cc injectors. Above that you will need 440's. Depends what you want.
As for mapping, loof for the ESL board, those are supposed to be pretty good, either that or a different ECU.
As for mapping, loof for the ESL board, those are supposed to be pretty good, either that or a different ECU.
01 February 2010, 04:37 PM
#3
Scooby Regular
Thread Starter
Join Date: Nov 2009
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
01 February 2010, 08:23 PM
#4
Buy this:
https://www.scoobynet.com/private-sa...ipped-ecu.html
Take old ECU out, put bought ECU in. Sorted for around 280 bhp and Sti performance. Aiming for 300+ starts to get expensive.
https://www.scoobynet.com/private-sa...ipped-ecu.html
Take old ECU out, put bought ECU in. Sorted for around 280 bhp and Sti performance. Aiming for 300+ starts to get expensive.
01 February 2010, 10:33 PM
#5
Scooby Regular
Join Date: Aug 2006
Posts: 3,214
Likes: 0
Received 0 Likes
on
0 Posts
Cracking chips those too. Only problem is that I don't think they can be mapped from the generic map that is already there.
Like I said, it depends what you want from your car.
Like I said, it depends what you want from your car.
Thread
Thread Starter
Forum
Replies
Last Post