scooby_impreza

Hello all,
Got a 2003 wrx blobeye which recently had a td05, decat up pipe and walbro fuel pump and remap. When i put my foot down in say second it will boost up to 1.5 bar then drop to 1.0 and stay there? It has lost alot of power any ideas??

Thanks

scooby_impreza

Anyone???

johned

Go back to your mapper.

PhilWrx100

Possible air leak? Check all pipes, and around intercooler too. Could even be the uppipe as these can split.
Phil

scooby_impreza

Thanks for the reply, would a blowing up pipe cause such a dramatic power loss? Thanks

PhilWrx100

If it's leaking you will lose power due to the poor turbo spool up, they normally run rough if this has happened.
Phil

scooby_impreza

Can confirm uppipe is fine and all pipes are ok no leaks, any ideas??

JGlanzaV

iTrader: (3)

clean the boost control solenoid....

scooby_impreza

Tried another nown working one stilp nothing :-(

JDM_Stig

iTrader: (3)

either a specialist or your mapper, you need to see what is going on so some diagnostic equipment will be required.