ecutek
#1
Scooby Regular
Thread Starter
Join Date: Mar 2008
Location: leeds west yorkshire
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
ecutek
as titled i have just had my car 04 plate sti type uk. ecutek,d at the raceing line.
on low boost = it holds 1.3 bar i managed to reach 349bhp - 325 torque.
on hi boost = it hold 1.6 bar and managed to reach 366bhp - 350 torque.
with mods blitz nur-spec type r exhauste, decat, 5 paddle clutch, k&n typoon indution kit and a greddy b-spec 11 boost controller.
im very happy with the figures but new to the subaru game...
do these figure sound about right. and what have other members reach with simular mods...
thanks
on low boost = it holds 1.3 bar i managed to reach 349bhp - 325 torque.
on hi boost = it hold 1.6 bar and managed to reach 366bhp - 350 torque.
with mods blitz nur-spec type r exhauste, decat, 5 paddle clutch, k&n typoon indution kit and a greddy b-spec 11 boost controller.
im very happy with the figures but new to the subaru game...
do these figure sound about right. and what have other members reach with simular mods...
thanks
Last edited by MRC; 23 March 2008 at 02:07 PM.
#3
Scooby Regular
Thread Starter
Join Date: Mar 2008
Location: leeds west yorkshire
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
cheers pal.
any body else on here got ecuteck on a type uk sti. if so what power the reach.
i also put a walbro 255 fuel pump in sorry forgot to say on 1st post
thanks
any body else on here got ecuteck on a type uk sti. if so what power the reach.
i also put a walbro 255 fuel pump in sorry forgot to say on 1st post
thanks
#4
Scooby Senior
iTrader: (3)
Join Date: Jun 2006
Location: Slowly rebuilding the kit of bits into a car...
Posts: 14,333
Likes: 0
Received 0 Likes
on
0 Posts
I'd almost say someone has some optomistic rollers....
But if that's right then you've done 30 bhp better than anyone else....
Normally the car would need headers to get those sorts of figures
Mine made 340 bhp, (2002 Sti). with similar spec.
DunxC
But if that's right then you've done 30 bhp better than anyone else....
Normally the car would need headers to get those sorts of figures
Mine made 340 bhp, (2002 Sti). with similar spec.
DunxC
#6
Scooby Regular
Thread Starter
Join Date: Mar 2008
Location: leeds west yorkshire
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
the racing line have a very good rep and use the dyno dynamic rollers. and matt their is a very well know for his mapping etc. thats why i went their...
what boost you run to hit 340bhp??
thanks for your reply..
#7
Scooby Regular
Thread Starter
Join Date: Mar 2008
Location: leeds west yorkshire
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
hi pal. why the face.
all i asked is what have other fellow sti onwer achived with the ecutek. etc..
mine seemed to of achived 366 bhp. any reason you know it shouldnt have????
all depents on who mapped it etc..
and raceing line are very good. and know throw out many members clubs.
Trending Topics
#8
Scooby Regular
iTrader: (4)
Join Date: Mar 2007
Location: SWANSEA/BRIDGEND
Posts: 3,784
Likes: 0
Received 0 Likes
on
0 Posts
as titled i have just had my car 04 plate sti type uk. ecutek,d at the raceing line.
on low boost = it holds 1.3 bar i managed to reach 349bhp - 325 torque.
on hi boost = it hold 1.6 bar and managed to reach 366bhp - 350 torque.
with mods blitz nur-spec type r exhauste, decat, 5 paddle clutch, k&n typoon indution kit and a greddy b-spec 11 boost controller.
im very happy with the figures but new to the subaru game...
do these figure sound about right. and what have other members reach with simular mods...
thanks
on low boost = it holds 1.3 bar i managed to reach 349bhp - 325 torque.
on hi boost = it hold 1.6 bar and managed to reach 366bhp - 350 torque.
with mods blitz nur-spec type r exhauste, decat, 5 paddle clutch, k&n typoon indution kit and a greddy b-spec 11 boost controller.
im very happy with the figures but new to the subaru game...
do these figure sound about right. and what have other members reach with simular mods...
thanks
#9
Scooby Regular
Thread Starter
Join Date: Mar 2008
Location: leeds west yorkshire
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
#10
Scooby Senior
I'm not saying it shouldn't have, but i'm yet to see a VF35 go anywhere near that high. There are loads of cars on SN mapped by Andy, Bob and others which have gone no where near 366
#11
Scooby Regular
iTrader: (2)
Join Date: Jul 2005
Location: Sometimes Bute, sometimes Renfrew
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
#12
Scooby Regular
Thread Starter
Join Date: Mar 2008
Location: leeds west yorkshire
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
good to see anotter getting great results on ecutex
Thread
Thread Starter
Forum
Replies
Last Post