jogyp

need info on installation and safety aspect of the installion

555ROB

You need to speak to a guy called KIP he has a version 7 WRX with 426BHP using 100cc shot of NOS....

Dazza01

hmmmmmm very intresting,can this be fitted to a UK MY97 turbo ?? can u get KIP to PM if u know who he is :

homer lawtey

Have a look at these forums,

http://www.noswizard.com/bboard/

http://www.twistedsanity.com/twistedforum/index.php

i8gtmf

He keeps frying his clutch too

kip

sorry i haven`t got back to you was on sidc and i8gtmf left a message for me.


the answer is yes it is safe and road legall. if you haven`t done a think to the cars engine just go for a 50 bhp shot of nos it will make a differance.
mine is opperated by the throttle and in turn runs thro a minimax computor which will let you set the amount of gas which flows into the engine and italso sets a period of time for it to flow in.at the mo mine is set at 30% gas and 8secs that is when 30% 0f the shot is let in and over the next 8secs it lets the other 70% in. but when i race it its set at 60% gas and 2secs.
the main problem with mine is that iam eating clutches i done 2 in 1 month and there not cheap and the 2nd 1 broke the fly wheel aswell. so iam just having a AR Racing clutch and lighted fly wheel fitted so this can take the power.its not so much the bhp which eats them its the torque.
if you are going to race it with the nos only take off with no more then 3000rpm because you will just sit there with the clutch spinning but when you get the set up right its good. i take off at 3500rpm and anything above that i just light up all 4 wheels.
the installation will take all day. mine is run thro black rubber pipe so you look under the bonnet and it doesn`t hit you in the face cost of the kit and installation was 1150.00.

so now i run a 327bhp with 100bhp of nos = 427 bhp of fun

by the way its a wet kit and made by wizard. i hope this will help

555ROB

Sorry for the loss of 1 BHP Kip..... my memory isn't that bad thou!!

ROB....