ZippyEFC

I was going to fit my KL into the dash today but i cant get the stupid thing to work.When i tap the bolt for the sensor the leds light up like a xmas tree but when i drive along at 75% power to calibrate it i get nothing.Any ideas?

sillysi

On second thoughts I will let someone else answer.

[Edited by sillysi - 12/17/2003 4:13:11 PM]

ZippyEFC

No go on tell me

Andy McCord

sorry i may be missing something, but i didnt know you could calibrate it as such, the options are increase sensitivity or decrease sensitivity, thats it AFAIK

Richard Askew

Thought it was play and play?

sillysi

Nope.

Go on then. I could only get one green when setting mine up so I have left it on the setting it was at when I fitted it. I know it works as the tap test shows full xmas tree lights. I run my car on Optimax and NF, the KL is very stable. I am just wondering myself what other people have found when settng theirs up.

Denmark

iTrader: (2)

Just leave it at full sensitivity,
On my car i only get the first green to "flikker" on Wot,this is on full sensitivity.

But when the car is really hot there has been in the past some red lights

Skassa

ZippyEFC

Thanks for the replys everyone.The instructions say to drive at 75% power and turn the sensetivity down until you only have 1 or 2 leds lit,but i'll just leave it on max sensetivity.

Cheers ZippyEFC.

Richard Askew

That'll teach me for not reading the manual properly

Gridlock Mikey

Can you read?

Mikey