Snapped front spliiter
#1
Snapped front spliiter
So annoyed! Took the boy to a local lake where the farmers roads are riddled with pot holes and after some rain the holes were full and I couldn't see how deep they were.
made it to the lake with no issues but on the way out I got caught out and broke my splitter.
other than Japan is there a supplier of the sti splitter?
im happy to get non oem but want it to look as close to oem as possible.
made it to the lake with no issues but on the way out I got caught out and broke my splitter.
other than Japan is there a supplier of the sti splitter?
im happy to get non oem but want it to look as close to oem as possible.
#2
Scooby Senior
iTrader: (1)
Gutted for you, I know the feeling by the way and need a new one myself. I repaired my last one with fiber glass and resin as it split completely in half in the middle. It worked out ok but had a weakness after that so was destroyed when I miss judged a curb.
Below is a link to a replacement for you, I will be ordering one myself soon.
https://www.scoobynet.com/subaru-par...-delivery.html
Slightly off topic, but what is going on with your front number plate?
Below is a link to a replacement for you, I will be ordering one myself soon.
https://www.scoobynet.com/subaru-par...-delivery.html
Slightly off topic, but what is going on with your front number plate?
Last edited by evil.soup; 05 January 2022 at 11:23 AM.
#4
Scooby Regular
farmers roads,imagine what could happen with Tein coilovers fitted
Last edited by JdmSti2006; 09 January 2022 at 08:25 AM.
The following users liked this post:
#6
Scooby Regular
I got a brand new OEM one from Sprinting Hare JDM.
The following users liked this post:
The following users liked this post:
Trending Topics
#9
Scooby Regular
I’ve used the HT Autos one on my old black one. Quality and fitment weren’t great although I did ‘make’ it fit eventually.
The following users liked this post:
#10
Scooby Regular
most of parts You fit are not oem, whats a point to hunt for one?
#11
Scooby Regular
I fitted one from HT Autos and fitment wasn't to bad but had to get some better bolts to fit it properly, to be fair it's taken a few knocks and held up well but has started to warp along front of the bumper over the years.
#12
Scooby Senior
iTrader: (1)
My last one was after market and the fit was very good. It was very easy to take off and on without issues, I had to take it off to cross the channel a few times as it almost always grounded out entering the ship.
The ones I have linked in the second post have been selling on here for many many years without any significant complaints that I have seen.
The ones I have linked in the second post have been selling on here for many many years without any significant complaints that I have seen.
#13
Scooby Regular
iTrader: (6)
got one from @KAS35RSTI for my hawk spec d many years ago and it was near identical to oem one
https://www.scoobynet.com/subaru-par...-delivery.html
pic of said splitter fitted
https://www.scoobynet.com/subaru-par...-delivery.html
pic of said splitter fitted
The following users liked this post:
#15
Scooby Senior
iTrader: (1)
Splitters are a consumable on the Impreza so no point in spending big money on them. I have known people to replace them every few years as they just don't last on our crap roads, they do a great job protecting the front bumper though.
Thread
Thread Starter
Forum
Replies
Last Post
NickBes
Essex Subaru Owners Club
12
23 March 2008 12:42 PM