anthonymcgrath

Hey chaps i have an 02 bug eye wrx wagon. I think the water header on top (above the turbo just in front) has seen better days and may be allowing coolant to escape when heated up. I checked pipes and they are ok.. but I did a search for new ones and they seem to be hard to find.
I found this on eBay and wondered if anyone swapped for one and did you find if was Ok? Alternatively can I get a new one because I've asked about and it's rare to find it seems.

Ta
Ant

https://rover.ebay.com/rover/0/0/0?m...2F223350547449

anthonymcgrath

Ps.. I'm sorry I'm still finding my feet on thisforum.. should have posted this in the mechanical section really.

yabbadoo4

iTrader: (8)

check the breakers section on here matty from mb developments will have a 2nd hand one

Don Clark

https://www.importcarparts.co.uk/par...y=&searchPart=

anthonymcgrath

So will that be ok in an 02 bugeye? It says updated version but I'm clueless there tbh as to whether it'll fit.

yabbadoo4

iTrader: (8)

will be fine m8

anthonymcgrath

Cool beans just read the ad and it says 00 to 07 bugeye so sounds perfect and looks much better design.
I'm going to grab that and numerous other bits as I decided to have my block rebuilt forged. Don't want anything tired going in there tbh. Mishimoto sell a bunch of new coolant lines too it seems.

Ta
Ant

yabbadoo4

iTrader: (8)

sounds good Ant keep us posted or start a thread if you have time.

anthonymcgrath

Will do

anthonymcgrath

Fitted earlier in the week. Went on without any hassles and much tidier. Cracked the lid off the old one and my god it was bubbled and rusty to hell inside. One less potential problem solved!