Help with metallic grinding noise
Thread Starter
Scooby Regular
Joined: Jan 2014
Posts: 31
Likes: 0
From: Mellieha - Malta
Help with metallic grinding noise
Opinions please? 2006 hawk with DCCD doing this ugly metallic grinding sound when under load or turning in full lock.
Rear diff has already been replaced brand new (Subaru genuine), including all bearings as diagnosed by the mech but didn't resolve. The noise remained the same as before.
Not driveshaft centre bearing or binding discs/handbrake either. Not clutch as it also does it when coasting in neutral.
Doubt it is the front CV joints as it does it going straight also. Manually opening or locking works but still does it.
Concerned it will be the center diff. Any ideas?
Many thanks in advance
Adrian
Last edited by drinud; May 8, 2019 at 10:45 PM.
It's worth checking the back plate to the discs, which can corrode and rub. Try sourcing it in the daylight too, a noise like that shouldn't be hard to track down with someone walking alongside.
Thread Starter
Scooby Regular
Joined: Jan 2014
Posts: 31
Likes: 0
From: Mellieha - Malta
Thread Starter
Scooby Regular
Joined: Jan 2014
Posts: 31
Likes: 0
From: Mellieha - Malta
Thread
Thread Starter
Forum
Replies
Last Post
john banks
Wheels, Tyres & Brakes
5
Jan 9, 2001 07:53 AM
