ossett2k2

iTrader: (9)

If 0 = 17
12 = 5
What does 10 =

Cheers
Rich

TheAngryFerret

7?

ossett2k2

iTrader: (9)

Does the ? Mean it's not 100% 7 ?
Seems in the ballpark but I need to be sure

TheAngryFerret

That would be my answer, seems like a pattern. No other info to give me any other idea

ossett2k2

iTrader: (9)

Sorry I'll add more info:

0 = 17mm difference (345mm-328mm)
12 = 5mm difference (345mm-340mm)
10 = ?mm difference (340mm-???mm)

Not sure if that helps?

poffer1

Baseline is 345. The number given on the left is the variance.

So yes, 10 is a 7mm difference (345mm-338mm)

(I assume you have a typo as underlined above)

lozgti1

Some clever ******* on here. My head just exploded again.lol

ossett2k2

iTrader: (9)

Excellent
Not a typo tho,I wanted a 340mm baseline if possible?
I assume it wouldn't be 340mm-333mm then?

ossett2k2

iTrader: (9)

Tell me about it lol
Can't find my head it's it that many pieces

poffer1

Probably need more info then if you have two variable numbers.

(if the numbers weren't so big, I would have guessed it's about wheel offset and wheel/tyre width)

ossett2k2

iTrader: (9)

I'm setting up my suspension ride height before I take it for a Geo setup.
I'm looking for 10mm positive rake.
So for level(no rake) it's 345Front / 328Rear
12mm positive rake is 345Front / 340Rear
Ideally I'm wanting 340front so need to know what to set the rear for 10mm rake.

poffer1

Eeuuww......suspension. That's maths, geometry AND physics

Assuming that changing the height from 345 to 340 has no affect on any geometry (and it's a big assumption, as I know nothing about suspension) you are right at 333.

Numerically you are correct, geometrically, I have no idea

ossett2k2

iTrader: (9)

Big thanks poffer1 and TheAngryFerret

I might go 345 front 338 rear ?
I will have a dig around and see what affect 5mm lower at the front might do to the Geo
And cheers lozgti1 for feeling my pain lol