Anyone good at math work this out please?T
If 0 = 17
12 = 5 What does 10 = Cheers Rich |
7?
|
Originally Posted by TheAngryFerret
(Post 11950954)
7?
Seems in the ballpark but I need to be sure :) |
Originally Posted by ossett2k2
(Post 11950956)
Does the ? Mean it's not 100% 7 ?
Seems in the ballpark but I need to be sure :) |
Sorry I'll add more info:
0 = 17mm difference (345mm-328mm) 12 = 5mm difference (345mm-340mm) 10 = ?mm difference (340mm-???mm) Not sure if that helps? |
Originally Posted by ossett2k2
(Post 11950963)
Sorry I'll add more info:
0 = 17mm difference (345mm-328mm) 12 = 5mm difference (345mm-340mm) 10 = ?mm difference (340mm-???mm) Not sure if that helps? So yes, 10 is a 7mm difference (345mm-338mm) (I assume you have a typo as underlined above) |
Some clever feckers on here. My head just exploded again.lol
|
Originally Posted by poffer1
(Post 11950970)
Baseline is 345. The number given on the left is the variance.
So yes, 10 is a 7mm difference (345mm-338mm) (I assume you have a typo as underlined above) Not a typo tho,I wanted a 340mm baseline if possible? I assume it wouldn't be 340mm-333mm then? |
Originally Posted by lozgti1
(Post 11950972)
Some clever feckers on here. My head just exploded again.lol
Can't find my head it's it that many pieces :lol1: |
Originally Posted by ossett2k2
(Post 11950973)
Excellent
Not a typo tho,I wanted a 340mm baseline if possible? I assume it wouldn't be 340mm-333mm then? (if the numbers weren't so big, I would have guessed it's about wheel offset and wheel/tyre width) |
I'm setting up my suspension ride height before I take it for a Geo setup.
I'm looking for 10mm positive rake. So for level(no rake) it's 345Front / 328Rear 12mm positive rake is 345Front / 340Rear Ideally I'm wanting 340front so need to know what to set the rear for 10mm rake. |
Eeuuww......suspension. That's maths, geometry AND physics :confused:
Assuming that changing the height from 345 to 340 has no affect on any geometry (and it's a big assumption, as I know nothing about suspension) you are right at 333. Numerically you are correct, geometrically, I have no idea :( |
Big thanks poffer1 and TheAngryFerret :thumb:
I might go 345 front 338 rear ? I will have a dig around and see what affect 5mm lower at the front might do to the Geo And cheers lozgti1 for feeling my pain lol |
All times are GMT +1. The time now is 05:40 AM. |
© 2024 MH Sub I, LLC dba Internet Brands