Gauges
#1
I recently fitted a boost gauge to a MY97,(taken off the spare plug on the manifold) trouble is there isn't a decent place to site the gauge. But I was clearing out my garage and came across a 3 gauge unit for an Audi Coupe that fitted in front of the gear lever - angled slightly to the driver as well.
So as I don't use the ash tray, I canabalised the Audi unit to fit. Now I have a space for an extra gauge. So what is the best to fit - an oil temperature or oil pressure gauge or something else.
Thanks Davy
So as I don't use the ash tray, I canabalised the Audi unit to fit. Now I have a space for an extra gauge. So what is the best to fit - an oil temperature or oil pressure gauge or something else.
Thanks Davy
#2
I would fit an oil temp guage -
reason - I have 4 extra guages on my sti but the thing that strikes me now is that even when the water temp guage on the normal dash is in its usual upper position - it is still 3 - 4 minutes from a cold start before the oil temp starts to come up - if you want to know when it is 'safe' to put your foot down - I recommend getting an oil temp guage.
oil pressure is fairly meaningless as it varies with the revs/load on the engine (but nice to know you still have some oil in the sump I guess) voltmeter reads 14 volts all the time ! - an ammeter might be more worthwhile.
Maybe someone should make a guage that shows gallons/hour for the scooby's fuel consumption - this would make sobering viewing I feel!
cheers,
Paul W
reason - I have 4 extra guages on my sti but the thing that strikes me now is that even when the water temp guage on the normal dash is in its usual upper position - it is still 3 - 4 minutes from a cold start before the oil temp starts to come up - if you want to know when it is 'safe' to put your foot down - I recommend getting an oil temp guage.
oil pressure is fairly meaningless as it varies with the revs/load on the engine (but nice to know you still have some oil in the sump I guess) voltmeter reads 14 volts all the time ! - an ammeter might be more worthwhile.
Maybe someone should make a guage that shows gallons/hour for the scooby's fuel consumption - this would make sobering viewing I feel!
cheers,
Paul W
#4
As I recall fitting oil temperature gauge is no an easy task since the Impreza does not have oil temperature unit.
GGR and others has oil pressure gauge and installing that is an easy task (about 2-3 hours for unskilled technician like me).
Eran.
GGR and others has oil pressure gauge and installing that is an easy task (about 2-3 hours for unskilled technician like me).
Eran.
#5
andy,
probably easier to fit than to spell the gauge (there I managed it) I always type this word as guage don't know why!
mine was factory fitted - lamco gauge - the plumbing looks straightforward and I think it is running from an existing sensor (can't remember what the last car looked like)- however it does involve pushing some wires through the bulkhead so not exactly a quick + simple diy job.
apexi, hks, and blitz all do suitable items - should be easy enough to locate.
GGR is one uk source
regards,
Paul W
probably easier to fit than to spell the gauge (there I managed it) I always type this word as guage don't know why!
mine was factory fitted - lamco gauge - the plumbing looks straightforward and I think it is running from an existing sensor (can't remember what the last car looked like)- however it does involve pushing some wires through the bulkhead so not exactly a quick + simple diy job.
apexi, hks, and blitz all do suitable items - should be easy enough to locate.
GGR is one uk source
regards,
Paul W
#6
Scooby Regular
iTrader: (3)
Join Date: Dec 1999
Location: UK
Posts: 13,274
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Paul, I'll give GGR a call tomorrow.
Getting the wires into the car won't be a problem, as I spent a weekend trying to find a way to get the pipes into the car for a boost gauge.
Thanks
Andy
Getting the wires into the car won't be a problem, as I spent a weekend trying to find a way to get the pipes into the car for a boost gauge.
Thanks
Andy
Thread
Thread Starter
Forum
Replies
Last Post