Front Speakers = No sound?
#1
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: Sep 2008
Location: Edinburgh
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
Front Speakers = No sound?
Hi,
Just picked up a Blobeye WRX this week.
The car has an Alpine CDE112RI HU fitted but also had a Subwoofer in the boot.
To negotiate the price of the car down I asked for the subwoofer to be removed which was done. However I noticed that there is no sound form either of the front speakers/tweeters. Checked the Fader control and it is fine set to front and rear equally. Removed unit and checked wiring, seemed to be a separate 4-way connector for FL/FR/RL/RR. Checked all plugs/skts by disconnecting then re-connecting but still no joy.
Anyone any ideas what might be going on and could it be related to the removal of the rear subwoofer?
PS Also turned off Subwoofer on the HU but still no difference.
Just picked up a Blobeye WRX this week.
The car has an Alpine CDE112RI HU fitted but also had a Subwoofer in the boot.
To negotiate the price of the car down I asked for the subwoofer to be removed which was done. However I noticed that there is no sound form either of the front speakers/tweeters. Checked the Fader control and it is fine set to front and rear equally. Removed unit and checked wiring, seemed to be a separate 4-way connector for FL/FR/RL/RR. Checked all plugs/skts by disconnecting then re-connecting but still no joy.
Anyone any ideas what might be going on and could it be related to the removal of the rear subwoofer?
PS Also turned off Subwoofer on the HU but still no difference.
#4
Well Id stick a multi meter on the back of the HU first ( on the seperate 4 way plug ) just to make sure theres an output there then Id pop a door panel off and have a look at the actual speaker itself and its wiring .Not sure if youd be confident with doing that or not .... You sure they left the speakers???
#6
Pretty much , this should help you get an idea and if you search here or google you'll find plenty info
https://www.scoobynet.com/interior-1...-to-guide.html
https://www.scoobynet.com/interior-1...-to-guide.html
Last edited by NAF; 15 February 2011 at 06:14 PM.
#7
Prob be easier for you to use a small test speaker instead of the multi meter too im thinking .. just touch its wires to each set of outputs on the back of the Alpine in turn
Trending Topics
#9
Scooby Regular
iTrader: (6)
Join Date: Aug 2010
Location: essex
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
just ring the previous owner, ask if he was using an amp, and if he left door speakers. would save lots of messing around.
and the door card and headunit are both VERY easy to remove if you need to
and the door card and headunit are both VERY easy to remove if you need to
#10
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: Sep 2008
Location: Edinburgh
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
NAF spot on the fronts were powered from the removed amp.
Now spliced back into the HU and working perfect - many thanks
RE54 - Just bought the car of a trader who was selling for his mate. Don't think either would have a clue what was powering the fronts tbh mate but thanks for the suggestion.
Now spliced back into the HU and working perfect - many thanks
RE54 - Just bought the car of a trader who was selling for his mate. Don't think either would have a clue what was powering the fronts tbh mate but thanks for the suggestion.
Thread
Thread Starter
Forum
Replies
Last Post