Group Buy on the CustomScoobies 92-96 ECU Chip
22 July 2004, 10:32 PM
#1
Scooby Regular
Thread Starter
Join Date: Jan 2004
Location: St.helens!!!!
Posts: 3,639
Likes: 0
Received 0 Likes
on
0 Posts
Group Buy on the CustomScoobies 92-96 ECU Chip
as title
http://bbs.sidc.co.uk/messageview.cf...threadid=20165
jon from custom scoobies has developed his own ecu upgrade, aong the lines of the scoobyecu/vos chips. (as in plug in second solt and cut resistor)
They are £120 on there own, but as this is a group buy, they will get cheaper with numbers. We already have 8 from SIDC so the price is down to £100 already, i will see what sort of price it will go to as numbers increase.
As this is my 1st group buy i have done, it is best to contact jon with questions, and probally send your money/cheques etc, straight to him.
thanks for reading
julian.
oh, post either on here or over there, up to you!
http://bbs.sidc.co.uk/messageview.cf...threadid=20165
jon from custom scoobies has developed his own ecu upgrade, aong the lines of the scoobyecu/vos chips. (as in plug in second solt and cut resistor)
They are £120 on there own, but as this is a group buy, they will get cheaper with numbers. We already have 8 from SIDC so the price is down to £100 already, i will see what sort of price it will go to as numbers increase.
As this is my 1st group buy i have done, it is best to contact jon with questions, and probally send your money/cheques etc, straight to him.
thanks for reading
julian.
oh, post either on here or over there, up to you!
Last edited by julian N/W wrx my93; 23 July 2004 at 12:13 AM.
22 July 2004, 11:24 PM
#2
Originally Posted by julian N/W wrx my93
as title
http://bbs.sidc.co.uk/messageview.cf...threadid=20165
jon from custom scoobies has developed his own ecu upgrade, aong the lines of the scoobyecu/vos chips. (as in plug in second solt and cut resistor)
They are £120 on there own, but as this is a group buy, they will get cheaper with numbers. We already have 8 from SIDC so the price is down to £100 already, i will see what sort of price it will go to as numbers increase.
As this is my 1st group buy i have done, it is best to contact jon with questions, and probally send your money/cheques etc, straight to him.
thanks for reading
julian.
http://bbs.sidc.co.uk/messageview.cf...threadid=20165
jon from custom scoobies has developed his own ecu upgrade, aong the lines of the scoobyecu/vos chips. (as in plug in second solt and cut resistor)
They are £120 on there own, but as this is a group buy, they will get cheaper with numbers. We already have 8 from SIDC so the price is down to £100 already, i will see what sort of price it will go to as numbers increase.
As this is my 1st group buy i have done, it is best to contact jon with questions, and probally send your money/cheques etc, straight to him.
thanks for reading
julian.
I'd post your car model and MY on here to help ensure a suitable remap is available and allow Julian to see numbers interested.
23 July 2004, 08:04 AM
#4
Scooby Regular
Join Date: Aug 2001
Location: herts
Posts: 1,109
Likes: 0
Received 0 Likes
on
0 Posts
my 93 ra hks hyper center and back box,(hks downpipe..still trying to find one..anyone.)apexi s-afr,air filter.tdo5..what will this chip do..thanks
Last edited by beario; 23 July 2004 at 08:09 AM.
Trending Topics
25 July 2004, 10:42 PM
#8
Scooby Regular
Join Date: Jul 2002
Location: RIP Moneys Scoob 440bhp/470lbsft 31-07-08
Posts: 6,005
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Pavlo
good luck with the customer support, and I hope my map still works properly when Jon sells them!
If you did the map, its basically the same as the scoobyecu isnt it?
26 July 2004, 08:20 PM
#10
Scooby Regular
Join Date: Aug 2003
Location: West Sussex
Posts: 394
Likes: 0
Received 0 Likes
on
0 Posts
I'll take two depending on outcome of above comments.....
One for me - 94uk with full de-cat (td04 I beleive, please correct if not!)
One for my dad - 96uk with full de-cat (once again, I beleive this is also a td04)
Please pm me for any other info you need.
Cheers
p.s - I beleive you have a few now with the SIDC lot also included, unfortunately I am not a member there otherwise i'd reply on there. Also will this affect the end price?
One for me - 94uk with full de-cat (td04 I beleive, please correct if not!)
One for my dad - 96uk with full de-cat (once again, I beleive this is also a td04)
Please pm me for any other info you need.
Cheers
p.s - I beleive you have a few now with the SIDC lot also included, unfortunately I am not a member there otherwise i'd reply on there. Also will this affect the end price?
Last edited by Gonza; 26 July 2004 at 08:22 PM.
26 July 2004, 08:46 PM
#11
Scooby Regular
Thread Starter
Join Date: Jan 2004
Location: St.helens!!!!
Posts: 3,639
Likes: 0
Received 0 Likes
on
0 Posts
no it won't!
the SIDC list
1. Julian JDM 93 WRX saloon
2. Andy UK 96 Turbo Saloon
3. stevie scooby
4. Walwal 94 WRX Saloon
5. Ormiboy ( 95 JDM, green panel filter , hks super dragger exhaust, and thats about it for engine mods )
6. Scoobboy (TD05, full decat, induction kit, boost controller, Walbro 255lt/hr, FSE FPR)
7. Scoobboy (TD05, full decat, induction kit, boost controller)
8. AdvoCake MY95 WRX (standard so far, until i can get a decat pipe)
9. The Deviant 94 WRX saloon
10. Roojai 94WRX wagon (with TD05 and complete decat)
11, Lemon 94 WRX salon (TD05, full decat, Panel filter, boost controller, VTA dump valve)
12. Wrx Iom....94 wrx Saloon. (Td05?, full AfterBurner decat, Zerospsorts induction, Polished intake pipe, dump valve)
13. scoobysnacks 94 WRX (ecu number Z4 and TD05 full decat induction kit -HKS BOV
add your name if not on there please!
the SIDC list
1. Julian JDM 93 WRX saloon
2. Andy UK 96 Turbo Saloon
3. stevie scooby
4. Walwal 94 WRX Saloon
5. Ormiboy ( 95 JDM, green panel filter , hks super dragger exhaust, and thats about it for engine mods )
6. Scoobboy (TD05, full decat, induction kit, boost controller, Walbro 255lt/hr, FSE FPR)
7. Scoobboy (TD05, full decat, induction kit, boost controller)
8. AdvoCake MY95 WRX (standard so far, until i can get a decat pipe)
9. The Deviant 94 WRX saloon
10. Roojai 94WRX wagon (with TD05 and complete decat)
11, Lemon 94 WRX salon (TD05, full decat, Panel filter, boost controller, VTA dump valve)
12. Wrx Iom....94 wrx Saloon. (Td05?, full AfterBurner decat, Zerospsorts induction, Polished intake pipe, dump valve)
13. scoobysnacks 94 WRX (ecu number Z4 and TD05 full decat induction kit -HKS BOV
add your name if not on there please!
26 July 2004, 09:22 PM
#12
Scooby Regular
Join Date: May 2003
Location: Hertfordshire
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
As I said at 'the other place' if it works okay on a MY95 WRX Wagon then I'll have one 
Rich
1. Julian JDM 93 WRX saloon
2. Andy UK 96 Turbo Saloon
3. stevie scooby
4. Walwal 94 WRX Saloon
5. Ormiboy ( 95 JDM, green panel filter , hks super dragger exhaust, and thats about it for engine mods )
6. Scoobboy (TD05, full decat, induction kit, boost controller, Walbro 255lt/hr, FSE FPR)
7. Scoobboy (TD05, full decat, induction kit, boost controller)
8. AdvoCake MY95 WRX (standard so far, until i can get a decat pipe)
9. The Deviant 94 WRX saloon
10. Roojai 94WRX wagon (with TD05 and complete decat)
11, Lemon 94 WRX salon (TD05, full decat, Panel filter, boost controller, VTA dump valve)
12. Wrx Iom....94 wrx Saloon. (Td05?, full AfterBurner decat, Zerospsorts induction, Polished intake pipe, dump valve)
13. scoobysnacks 94 WRX (ecu number Z4 and TD05 full decat induction kit -HKS BOV
14. WagonRich - MY95 WRX Wagon (STD. apart from back box)
Rich
1. Julian JDM 93 WRX saloon
2. Andy UK 96 Turbo Saloon
3. stevie scooby
4. Walwal 94 WRX Saloon
5. Ormiboy ( 95 JDM, green panel filter , hks super dragger exhaust, and thats about it for engine mods )
6. Scoobboy (TD05, full decat, induction kit, boost controller, Walbro 255lt/hr, FSE FPR)
7. Scoobboy (TD05, full decat, induction kit, boost controller)
8. AdvoCake MY95 WRX (standard so far, until i can get a decat pipe)
9. The Deviant 94 WRX saloon
10. Roojai 94WRX wagon (with TD05 and complete decat)
11, Lemon 94 WRX salon (TD05, full decat, Panel filter, boost controller, VTA dump valve)
12. Wrx Iom....94 wrx Saloon. (Td05?, full AfterBurner decat, Zerospsorts induction, Polished intake pipe, dump valve)
13. scoobysnacks 94 WRX (ecu number Z4 and TD05 full decat induction kit -HKS BOV
14. WagonRich - MY95 WRX Wagon (STD. apart from back box)
26 July 2004, 10:22 PM
#13
I hope it goes well for Jon, more importantly I hope it goes well for everyone buying from him, and that he is able to sort out the problems with relentlessly detting cars, overboosting, underboosting,, running lean and all the other problems one faces with cars that are supposed to be "the same".
Jon has had at least two scoobyecus from me (third direct to someone else) in the past 3 months or so, now he has his own, hopefully he has improved a few of the annoyances of the scoobyecu (ease of repair, 2 eeproms per board etc)
All you need to map these ECUs is a hex editor, but without at least a Select monitor or some other device, you will not know where to change the maps.
Paul
Jon has had at least two scoobyecus from me (third direct to someone else) in the past 3 months or so, now he has his own, hopefully he has improved a few of the annoyances of the scoobyecu (ease of repair, 2 eeproms per board etc)
All you need to map these ECUs is a hex editor, but without at least a Select monitor or some other device, you will not know where to change the maps.
Paul
26 July 2004, 10:36 PM
#14
Scooby Regular
Thread Starter
Join Date: Jan 2004
Location: St.helens!!!!
Posts: 3,639
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Pavlo
good luck with the customer support, and I hope my map still works properly when Jon sells them!
explane the customer support part please!
is there something we should know?????????????
26 July 2004, 10:51 PM
#15
I don't think there is anything paticularly dodgy, but I have seen all sorts of mapping done on chips llike these. Japanese so called tuners get away with murder for instance, some of the stuff I have pulled from imports is pretty scary.
Perhaps Jon can shed some light on exactly how he has mapped them.
Paul
Perhaps Jon can shed some light on exactly how he has mapped them.
Paul
26 July 2004, 11:37 PM
#16
Scooby Regular
Join Date: Aug 2003
Location: West Sussex
Posts: 394
Likes: 0
Received 0 Likes
on
0 Posts
In response to earlier....
Names added as follows,
1. Julian JDM 93 WRX saloon
2. Andy UK 96 Turbo Saloon
3. stevie scooby
4. Walwal 94 WRX Saloon
5. Ormiboy ( 95 JDM, green panel filter , hks super dragger exhaust, and thats about it for engine mods )
6. Scoobboy (TD05, full decat, induction kit, boost controller, Walbro 255lt/hr, FSE FPR)
7. Scoobboy (TD05, full decat, induction kit, boost controller)
8. AdvoCake MY95 WRX (standard so far, until i can get a decat pipe)
9. The Deviant 94 WRX saloon
10. Roojai 94WRX wagon (with TD05 and complete decat)
11, Lemon 94 WRX salon (TD05, full decat, Panel filter, boost controller, VTA dump valve)
12. Wrx Iom....94 wrx Saloon. (Td05?, full AfterBurner decat, Zerospsorts induction, Polished intake pipe, dump valve)
13. scoobysnacks 94 WRX (ecu number Z4 and TD05 full decat induction kit -HKS BOV
14. WagonRich - MY95 WRX Wagon (STD. apart from back box)
15. Gonza 94uk saloon - full H&S de-cat (td04 i beleive)
16. Delboy 96uk saloon - full H&S de-cat
Last two from earlier post as mentioned, can someone send me pm details for who and when to send cheque etc...
One last thing, can these be "re-programmed" if there are any problems, i.e over boosting etc???
Cheers
1. Julian JDM 93 WRX saloon
2. Andy UK 96 Turbo Saloon
3. stevie scooby
4. Walwal 94 WRX Saloon
5. Ormiboy ( 95 JDM, green panel filter , hks super dragger exhaust, and thats about it for engine mods )
6. Scoobboy (TD05, full decat, induction kit, boost controller, Walbro 255lt/hr, FSE FPR)
7. Scoobboy (TD05, full decat, induction kit, boost controller)
8. AdvoCake MY95 WRX (standard so far, until i can get a decat pipe)
9. The Deviant 94 WRX saloon
10. Roojai 94WRX wagon (with TD05 and complete decat)
11, Lemon 94 WRX salon (TD05, full decat, Panel filter, boost controller, VTA dump valve)
12. Wrx Iom....94 wrx Saloon. (Td05?, full AfterBurner decat, Zerospsorts induction, Polished intake pipe, dump valve)
13. scoobysnacks 94 WRX (ecu number Z4 and TD05 full decat induction kit -HKS BOV
14. WagonRich - MY95 WRX Wagon (STD. apart from back box)
15. Gonza 94uk saloon - full H&S de-cat (td04 i beleive)
16. Delboy 96uk saloon - full H&S de-cat
Last two from earlier post as mentioned, can someone send me pm details for who and when to send cheque etc...
One last thing, can these be "re-programmed" if there are any problems, i.e over boosting etc???
Cheers
26 July 2004, 11:56 PM
#17
My thoughts exactly Paul.
Quite different map needed for TD04 and TD05 ( I know ... I had trouble getting a good TD04 map for ScoobyECU ! ) and seems to be significant differences in code / locations for different series of OEM ECU's, so 1 chip may not fit all.
Look at all the cars on the list that are all the same ......
Gonza - yeah these can be "re-mapped" but you would need to pull the chips and send back for re-writing ... unless Jon can custom map in situ?
I was going to go for the custom mapping of my ScoobyECU ( With Pavlo ) but now considering a Power FC ...
Quite different map needed for TD04 and TD05 ( I know ... I had trouble getting a good TD04 map for ScoobyECU ! ) and seems to be significant differences in code / locations for different series of OEM ECU's, so 1 chip may not fit all.
Look at all the cars on the list that are all the same ......
Gonza - yeah these can be "re-mapped" but you would need to pull the chips and send back for re-writing ... unless Jon can custom map in situ?
I was going to go for the custom mapping of my ScoobyECU ( With Pavlo ) but now considering a Power FC ...
Last edited by vulnax999; 26 July 2004 at 11:58 PM.
27 July 2004, 01:44 AM
#19
Scooby Regular
Join Date: Apr 2003
Location: Cambridgeshire
Posts: 1,541
Likes: 0
Received 0 Likes
on
0 Posts
16. Delboy 96uk saloon - full H&S de-cat
For a moment I thought I had been put down for one then noticed the 2 missing
Deffo agree with what Paul has said
Cheers
27 July 2004, 01:54 AM
#20
Scooby Regular
Join Date: Feb 2002
Location: oustide the asylum?
Posts: 3,306
Likes: 0
Received 0 Likes
on
0 Posts
Maybe I should just buy one... It'll save me a few evenings bothersome mapping
550cc injectors, Hybrid FMIC, FSE (or should that be FFS) reg, walbro 255l/hr pump, 3 bar MAP sensor, induction kit, decat, soon-to-be-ported headers, soon-to-be-front entry TD05...
It runs but isn't quite right yet. Oh well , I ought to stop buying other cars and finish this one...
550cc injectors, Hybrid FMIC, FSE (or should that be FFS) reg, walbro 255l/hr pump, 3 bar MAP sensor, induction kit, decat, soon-to-be-ported headers, soon-to-be-front entry TD05...
It runs but isn't quite right yet. Oh well , I ought to stop buying other cars and finish this one...
27 July 2004, 08:07 AM
#21
Scooby Regular
Thread Starter
Join Date: Jan 2004
Location: St.helens!!!!
Posts: 3,639
Likes: 0
Received 0 Likes
on
0 Posts
so we are going to have 2 lists just to keep track of every one!
so please check the list and add your self/car details.....#
thanks
SIDC List:-
1. Julian JDM 93 WRX saloon
2. Andy UK 96 Turbo Saloon
3. stevie scooby
4. Walwal 94 WRX Saloon
5. Ormiboy ( 95 JDM, green panel filter , hks super dragger exhaust, and thats about it for engine mods )
6. Scoobboy (TD05, full decat, induction kit, boost controller, Walbro 255lt/hr, FSE FPR)
7. Scoobboy (TD05, full decat, induction kit, boost controller)
8. AdvoCake MY95 WRX (standard so far, until i can get a decat pipe)
9. The Deviant 94 WRX saloon
10. Roojai 94WRX wagon (with TD05 and complete decat)
11, Lemon 94 WRX salon (TD05, full decat, Panel filter, boost controller, VTA dump valve)
12. Wrx Iom....94 wrx Saloon. (Td05?, full AfterBurner decat, Zerospsorts induction, Polished intake pipe, dump valve)
13. scoobysnacks 94 WRX (ecu number Z4 and TD05 full decat induction kit -HKS BOV
ScoobyNet List:-
1. WagonRich - MY95 WRX Wagon (STD. apart from back box)
2. Gonza - 94uk saloon - full H&S de-cat (td04 i beleive)
3. Delboy - 96uk saloon - full H&S de-cat
4. Spectra - my93 full decat i want it to run on super u/l
5. Beario - my 93 ra hks hyper center and back box, apexi s-afr,air filter.tdo5
6. Brain H - MY94 WRX,Magnex de cat centre section and back box and K+N pannel filter
7. David Wallis - Put me down for one for a laugh!
so thats 21/22 (if david really wants one)
i was told if i could get 8, the price woud go down by £20 to £100, well i've got nearly 3 times that. lets see what sort of deal Jon can do!
so please check the list and add your self/car details.....#
thanks
SIDC List:-
1. Julian JDM 93 WRX saloon
2. Andy UK 96 Turbo Saloon
3. stevie scooby
4. Walwal 94 WRX Saloon
5. Ormiboy ( 95 JDM, green panel filter , hks super dragger exhaust, and thats about it for engine mods )
6. Scoobboy (TD05, full decat, induction kit, boost controller, Walbro 255lt/hr, FSE FPR)
7. Scoobboy (TD05, full decat, induction kit, boost controller)
8. AdvoCake MY95 WRX (standard so far, until i can get a decat pipe)
9. The Deviant 94 WRX saloon
10. Roojai 94WRX wagon (with TD05 and complete decat)
11, Lemon 94 WRX salon (TD05, full decat, Panel filter, boost controller, VTA dump valve)
12. Wrx Iom....94 wrx Saloon. (Td05?, full AfterBurner decat, Zerospsorts induction, Polished intake pipe, dump valve)
13. scoobysnacks 94 WRX (ecu number Z4 and TD05 full decat induction kit -HKS BOV
ScoobyNet List:-
1. WagonRich - MY95 WRX Wagon (STD. apart from back box)
2. Gonza - 94uk saloon - full H&S de-cat (td04 i beleive)
3. Delboy - 96uk saloon - full H&S de-cat
4. Spectra - my93 full decat i want it to run on super u/l
5. Beario - my 93 ra hks hyper center and back box, apexi s-afr,air filter.tdo5
6. Brain H - MY94 WRX,Magnex de cat centre section and back box and K+N pannel filter
7. David Wallis - Put me down for one for a laugh!
so thats 21/22 (if david really wants one)
i was told if i could get 8, the price woud go down by £20 to £100, well i've got nearly 3 times that. lets see what sort of deal Jon can do!
Last edited by julian N/W wrx my93; 27 July 2004 at 08:16 AM.
27 July 2004, 11:41 AM
#24
Scooby Regular
Join Date: Mar 2002
Location: Fcon Power Writer
Posts: 4,338
Likes: 0
Received 0 Likes
on
0 Posts
Quality Thread!!!
Tweenierob
3.3, Garrett GT40/42, 3.5" full decat, 3bar boost, 200shot of nitrous, 8x 740cc inj....
Am having trouble with idle atm
Rob
Tweenierob
3.3, Garrett GT40/42, 3.5" full decat, 3bar boost, 200shot of nitrous, 8x 740cc inj....
Am having trouble with idle atm
Rob
27 July 2004, 11:56 AM
#25
Scooby Regular
Join Date: Apr 2003
Location: Cambridgeshire
Posts: 1,541
Likes: 0
Received 0 Likes
on
0 Posts
From SIDC - On an import brings you upto around 300bhp with a full decat, air filter and remaps it to UK Super Unleaded fuel 97RON.
Perhaps I should bin my custom mapping and have one of these custom mapped fo my car
Tweenierob
3.3, Garrett GT40/42, 3.5" full decat, 3bar boost, 200shot of nitrous, 8x 740cc inj....
Am having trouble with idle atm
3.3, Garrett GT40/42, 3.5" full decat, 3bar boost, 200shot of nitrous, 8x 740cc inj....
Am having trouble with idle atm
Cheers
Last edited by Delboy2; 27 July 2004 at 12:29 PM.
27 July 2004, 12:47 PM
#27
Scooby Regular
Join Date: Aug 2003
Location: West Sussex
Posts: 394
Likes: 0
Received 0 Likes
on
0 Posts
In response to a few comments on this thread, I have put down for myself and Delboy for one, however, being UK's i'm hoping that this map will work ok for us as it seems the majority are for imports. Is this going to cause any problems or would it be worth waiting for Scoobyecu for the UK's????
Comments please....
p.s. I'm only finding this out as if it does not go well with the UK then I wouldn't want to take a valuable space for someone with a wrx.
Cheers
Comments please....
p.s. I'm only finding this out as if it does not go well with the UK then I wouldn't want to take a valuable space for someone with a wrx.
Cheers