cashyn

hi lads im looking for antilag - launch control for my P1 but not sure what I need I would rather buy secondhand if there any out there also im not sure of the damage if any that they do to your engine any advice would be helpful thanks Neil.

Steve's Sti

iTrader: (2)

Launch control is good anti lag not so good

JGlanzaV

iTrader: (3)

Why is launch control good and anti lag isn't? Lol.

Launch control is harder on everything, anti lag can just be mapped for pops and bangs for "show"

And they effectively are the same thing just used in a slightly different way

You need a simtek or alkatek etc ecu with the capability for this with a remap etc to set it all up

Steve's Sti

iTrader: (2)

Imo anti lag too aggressive if its not right launch control is hardly used

blackpoolrock

Just had my anti lag on and LC - it was used on garstang road if you like to make me an offer ??

marshall332bhp

Pops and bangs is a lot different from anti lag!

Steve's Sti

iTrader: (2)

Lol you need to say if your willing to post haha

blackpoolrock

No collection only !

blackpoolrock

Cashyn anti lag and LC are not physical things you can buy ! It's mapped into the map

cashyn

hi guys I know its the map but the ecu has to be capable of this I don't want to knacker my car up but they sound awesome with anti lag on I only use maybe twice a month so I don't do many miles whats the going price for ecu capable of this ? I need to consider price of the remap also to suit my car ?
thanks neil

jura11

iTrader: (7)

Hi there

What car you have?

Do you have classic or New age?

If you have Classic you will need aftermarket ECU like is SimTek,AlcaTek,Syvecs and other ECU

If you have New age then you have simple option of the running CarBerry ROM which allow you to have ALS,LC etc

But still i would go with aftermarket ECU like is Syvecs,this ECU is without the doubts best on the market

Jura

cashyn

hi I have a 2000 P1 running ej2.5 forged pistons standard crank and rods running at 343 bhp mapped at Scooby clinic they have told me this block will take 400 bhp ? but im maxed out with injectors and ecutec ecu they say ? I have been to drag meets and spoke to people who say they have loads more bhp than me on standard set up ? is this right or are some of them talking bull****? please advise thanks neil

jura11

iTrader: (7)

Hi Neil

What turbo you are running?

What injectors you are running?

Is yours 2.5L running forged pistons and rods?


Jura

cashyn

hi running td05 with yellow 440cc injectors
ecutec ecu
ej2.5 block mhale pistons
standard rods and crank
uprated crank bearings and cometic gaskets
thanks Neil.

cashyn

my problem is every time I go to the clink it costs me £500 even though it was running fine when I arrived ? but its apparently down on power ? I spend £500 and leave with the same car ? is this normal ? or are they having my pants down ?

marshall332bhp

Sounds like the having you over from what you have said. A lot of mixed reports about scooby clinic on here.

jura11

iTrader: (7)

Hi Neil

If you are running still TD05H(16G) then yours BHP is spotless,injectors holding you back and if you will go with bigger turbo like is SC42,MDX321T or MDX555 you will need to run bigger injectors like 740cc,you can send yours injectors to Lateral Performancefor reflowing,but still I would speak with Zen Performance about the their injectors options,will cost you more,but still they're better

You are running TMIC(Top Mount Intercooler) or FMIC(Front Mount Intercooler)?

About the ECU options,Syvecs or AlcaTek,speak with Simon@JGM,Paul@Zen Performance and MartynJ@Engine Tuner

Not sure how much yours engine will take,but I would say 400bhp is possible to run,I know few guys running 2.5L engines with similar spec at 400bhp without the problem

As above I would speak like with above mentioned dealers/mappers and plus I would speak with the ScoobyClinic about the ECU options

Jura

cashyn

hi ive gone from wanting pops and bangs to having a go ?
I would just like to get a tuner I can trust without empting my bank account nowt wrong with that ? is there mate

jura11

iTrader: (7)

Hi Neil

At first speak with above mentioned tuners/mappers which should help you without the emptying yours bank account

Yours 440cc injectors will don't take you above 350bhp,maybe little bit more with FPR,but still I would go with bigger injectors if you want more power

You will need aftermarket ECU like I've said SimTek/AlcaTek or Syvecs if you want ALS(Anti Lag,Launch Control)

Where are you located ?

Jura