Another "How much BHP" question....
#1
Scooby Newbie
Thread Starter
Join Date: May 2006
Location: Surrey/Hants border
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Another "How much BHP" question....
Sorry if this has been n gone long ago......
99/2000 UK turbo classic. Totally standard engine, apart from exhaust & panel filter. What sought of power figures are poss by just a remap alone?? Not interested in bigger turbo/intercooler/throttle body etc etc.
Car must stay 100% drivable.
Many thanks
99/2000 UK turbo classic. Totally standard engine, apart from exhaust & panel filter. What sought of power figures are poss by just a remap alone?? Not interested in bigger turbo/intercooler/throttle body etc etc.
Car must stay 100% drivable.
Many thanks
#5
Scooby Regular
Join Date: Dec 2011
Location: birmingham
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
Yeah about 260ish. If ur gna pay so much for the remap on a uk(unless ur lucky and can get it done cheap or get a second hand ecu), plus ur filter and exhaust, why not throw on a second hand td05 16g and a walbro pump whilst ur at it before the map, mine made 325bhp/280lbft torque and stil as reliable and driveable at this spec
Trending Topics
#8
Scooby Regular
iTrader: (3)
Join Date: Jan 2013
Location: Telford
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
I bought mine with a SS turbo back exhaust (de-cat), panel filter, standard turbo, already mapped with boost@ 1.7bar and it made 240bhp. Engine's got 120k, now running 226bhp@ 1bar (both figures at enginetuner.co.uk)
HTH
HTH
#11
Scooby Regular
will be fiuel related to hit 240. The bigger concern is 1.7 is way too much boost to be safe though, who actualy dare map it to that?
My dads 51 plate bug sti made 305 after decat and remap, normaly they run 330 ish, but his was on 95ron as well. (he is 65 lol)
My dads 51 plate bug sti made 305 after decat and remap, normaly they run 330 ish, but his was on 95ron as well. (he is 65 lol)
#12
Scooby Regular
iTrader: (3)
Join Date: Jan 2013
Location: Telford
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
I don't know who mapped it originally, it wasn't described as mapped when I bought it but Martyn at enginetuner.co.uk said it must have been mapped to have the boost limit removed. He was the one that turned the boost down due to the milage on the engine. I've ran it on Tesco Momentum since I've had it including when it went to Martyn.
So is 240 low or high then? Or 226 as the case may be... (hopefully that only helps answer the OP)
I should add, Martyn DID NOT map it for me, he merely put it on he rollers for power figure and to check it was running right. He seemed happy enough with 226.
So is 240 low or high then? Or 226 as the case may be... (hopefully that only helps answer the OP)
I should add, Martyn DID NOT map it for me, he merely put it on he rollers for power figure and to check it was running right. He seemed happy enough with 226.
Last edited by 4evernewbie; 28 January 2013 at 12:28 PM.
Thread
Thread Starter
Forum
Replies
Last Post