What parts are required to swap a TD04 to TD05-16 on UK MY99?
#1
Scooby Regular
Thread Starter
iTrader: (7)
Join Date: Mar 2010
Location: Essex
Posts: 709
Likes: 0
Received 0 Likes
on
0 Posts
What parts are required to swap a TD04 to TD05-16 on UK MY99?
Hi all,
Looking to swap the TD04 on my MY99 UK car to a TD05-16 (will be modified for front entry). Could someone please tell me for definate if any of the oil or water lines will need changing and any other relevant info for this conversion? Would like to get all the parts I need before swapping the turbo over.
Thanks
Looking to swap the TD04 on my MY99 UK car to a TD05-16 (will be modified for front entry). Could someone please tell me for definate if any of the oil or water lines will need changing and any other relevant info for this conversion? Would like to get all the parts I need before swapping the turbo over.
Thanks
#2
Hi all,
Looking to swap the TD04 on my MY99 UK car to a TD05-16 (will be modified for front entry). Could someone please tell me for definate if any of the oil or water lines will need changing and any other relevant info for this conversion? Would like to get all the parts I need before swapping the turbo over.
Thanks
Looking to swap the TD04 on my MY99 UK car to a TD05-16 (will be modified for front entry). Could someone please tell me for definate if any of the oil or water lines will need changing and any other relevant info for this conversion? Would like to get all the parts I need before swapping the turbo over.
Thanks
#3
Scooby Regular
iTrader: (2)
Join Date: Aug 2007
Location: Northern Ireland. Part of the UK
Posts: 659
Likes: 0
Received 0 Likes
on
0 Posts
You will need a complete TD05 turbo as the , water lines and connection banjo for the oil feed are different to that of the TD04.
Finally a remap to suit the TD05 to get the best performance and safety out of it.
Finally a remap to suit the TD05 to get the best performance and safety out of it.
Last edited by 71/200; 22 July 2010 at 12:33 PM.
#5
Scooby Regular
Thread Starter
iTrader: (7)
Join Date: Mar 2010
Location: Essex
Posts: 709
Likes: 0
Received 0 Likes
on
0 Posts
Out of interest, what if the same question was TD04 -> VF22? I believe a different oil feed is required with a restrictor for the roller bearing turbo.. can anyone shed the facts on this also? Thanks
#6
Scooby Regular
iTrader: (10)
That is correct mate as most vf turbo's are ball bearing housed means they require less oil to feed them where as a sleeve bearing turbo requires more oil. I fitted a td05 turbo to a wrx back in april and the the water pipes were exactly the same as were the banjo bolts for the oil on the td04,so no need to change - both sleeve bearing turbos.
#7
Scooby Regular
Thread Starter
iTrader: (7)
Join Date: Mar 2010
Location: Essex
Posts: 709
Likes: 0
Received 0 Likes
on
0 Posts
Am I right in thinking the VF22 was fitted to the 22b model? Should this mean I can get all the pipes/fitting I need from Subaru direct? Does anyone have a list of all that's required to fit this turbocharger to a MY99 car? Thanks.
Trending Topics
#9
Scooby Regular
iTrader: (10)
If you are fitting a vf 22 then you will need the top banjo bolt,your water feed pipes off your td04 will fit,they are normally joined by a small piece of metal between each pipe,simply bend back and forth till the metal snaps then bolt to turbo accordingly using copper washers both sides of the bolt .
Thread
Thread Starter
Forum
Replies
Last Post
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM
hedgecutter
General Technical
3
25 September 2015 02:35 PM