speedo and rev counter not working
#1
Scooby Regular
Thread Starter
Join Date: Dec 2008
Location: telford
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
speedo and rev counter not working
as the title says my speedo and rev counter are not working i fitted my kmh-mph adapter today and it hasnt worked since?
im positive that its on the back of the clocks properly and that the speedo cable is connected correctly too is there anything else it could be?
matt
im positive that its on the back of the clocks properly and that the speedo cable is connected correctly too is there anything else it could be?
matt
#3
Scooby Regular
Thread Starter
Join Date: Dec 2008
Location: telford
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
its a 95 wrx import
and it was a little black adapter that plugs inbetween the clocks and the speedo cable im positive th ecable and the adapter is on properly as the adapter is pushed firmly on as it says in destructions and the speedo cable is securley and fully plugged into the adapter
and it was a little black adapter that plugs inbetween the clocks and the speedo cable im positive th ecable and the adapter is on properly as the adapter is pushed firmly on as it says in destructions and the speedo cable is securley and fully plugged into the adapter
#4
Scooby Regular
Join Date: Feb 2008
Location: London
Posts: 1,143
Likes: 0
Received 0 Likes
on
0 Posts
its a 95 wrx import
and it was a little black adapter that plugs inbetween the clocks and the speedo cable im positive th ecable and the adapter is on properly as the adapter is pushed firmly on as it says in destructions and the speedo cable is securley and fully plugged into the adapter
and it was a little black adapter that plugs inbetween the clocks and the speedo cable im positive th ecable and the adapter is on properly as the adapter is pushed firmly on as it says in destructions and the speedo cable is securley and fully plugged into the adapter
#5
Scooby Regular
Join Date: Dec 2006
Location: sunny north east
Posts: 743
Likes: 0
Received 0 Likes
on
0 Posts
sounds like you may have piulled a connector off the back while messing about behind the clocks
theres connectors on either side/edge of the 'clock' unit and a little blue one behind yer temp gauge (more or less)
dont think you'll really be able to get at them without removing the clocks complete - but that aint difficult (I did it yesterday to change a kph dial to a mph dial) took maybe 5-10 mins to remove and same to replace
.....and in the end I didnt change the dial as the speeo needle wouldnt come off and the new dial (from ebay) was black instead of grey and was crap, basically)
theres connectors on either side/edge of the 'clock' unit and a little blue one behind yer temp gauge (more or less)
dont think you'll really be able to get at them without removing the clocks complete - but that aint difficult (I did it yesterday to change a kph dial to a mph dial) took maybe 5-10 mins to remove and same to replace
.....and in the end I didnt change the dial as the speeo needle wouldnt come off and the new dial (from ebay) was black instead of grey and was crap, basically)
#6
Scooby Regular
iTrader: (4)
Join Date: Oct 2008
Location: skipton north yorkshire
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
put a pic up of the adaptor mate as i changed mine and on mine u take the speedo drive off the gearbox and put the adaptor in then the speedo cable back in the adaptor didnt have to take the clocks out
#7
Scooby Regular
Thread Starter
Join Date: Dec 2008
Location: telford
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
just drove the car for a while when i get upto 30mph the speedo starts moving but only reads around 10mph slower than actual speed but the rev counter still isnt working at all
will gte pics of the adapter 2mo
will gte pics of the adapter 2mo
Trending Topics
#8
Scooby Regular
Join Date: Jul 2002
Location: Under your bonnet
Posts: 9,173
Likes: 0
Received 0 Likes
on
0 Posts
His is correct, I use the ones that fit the back of the clocks also.
#9
Scooby Regular
Join Date: Jul 2002
Location: Under your bonnet
Posts: 9,173
Likes: 0
Received 0 Likes
on
0 Posts
Rev counter is not part of the speedo converter, that works purely on the MPH gauge.
As said you've probably disturbed a connector plug (electrical) whilst fitting the converter.
As said you've probably disturbed a connector plug (electrical) whilst fitting the converter.
Thread
Thread Starter
Forum
Replies
Last Post
Wingnuttzz
Member's Gallery
30
26 April 2022 11:15 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
38
17 July 2016 10:43 PM