for those running a z32 maf!!
14 August 2008, 09:15 PM
#3
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: May 2005
Location: richmond,surrey
Posts: 861
Likes: 0
Received 0 Likes
on
0 Posts
thats what i thought...but the maf ive received is bigger!!!
what color label is yours!
mines yellow.
just want make sure iv got the right one now.
my codes are....22680 61uoo or a36-000 p60 or 0224a??
nice1.
edited to add it has 3 wires too???
what color label is yours!
mines yellow.
just want make sure iv got the right one now.
my codes are....22680 61uoo or a36-000 p60 or 0224a??
nice1.
edited to add it has 3 wires too???
Last edited by scogsywrx; 14 August 2008 at 09:18 PM.
14 August 2008, 09:35 PM
#4
Scooby Regular
Join Date: Feb 2006
Location: Eastbourne
Posts: 686
Likes: 0
Received 0 Likes
on
0 Posts
Hi mine has a orange label, cant tell you what code is on it until tomorrow though as my cars locked up for the night. I do know there are 2 different sizes though
14 August 2008, 09:39 PM
#5
Scooby Regular
Bought mine brand new from Nengun in Japan. Straight swap in terms of size. There are AFAIK two sizes though, 80mm and 90mm, just as there are two sizes of Subaru fitted MAF.
14 August 2008, 09:50 PM
#6
Scooby Regular
Join Date: Sep 2006
Location: Norway\Bergen
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
AFAIK, a Z32 is 80mm and a direct swap for the stock one, with regards to size.
The Q45 maf however, is 90mm and bigger than Z32. You might have gotten that one.
this is how my Z32 looked:
The Q45 maf however, is 90mm and bigger than Z32. You might have gotten that one.
this is how my Z32 looked:
Trending Topics
14 August 2008, 11:03 PM
#10
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: May 2005
Location: richmond,surrey
Posts: 861
Likes: 0
Received 0 Likes
on
0 Posts
ok any1 know where i can get an adaptor for it so i can fit my filter too it?
also how to wire it up too my loom.
thanks again.
also how to wire it up too my loom.
thanks again.
Last edited by scogsywrx; 14 August 2008 at 11:07 PM.
15 August 2008, 09:29 AM
#11
Scooby Regular
Because they can't be used without rescaling, which you can't do unless you've got a mappable ECU. And tbh neither MAF are made by Nissan or Subaru, they're both made by Unisia JECS in Japan.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
