Lambda Sensor Wiring
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Mar 2007
Location: Bridgend
Posts: 2,268
Likes: 0
Received 0 Likes
on
0 Posts
Lambda Sensor Wiring
Hi guys bought a universal 3 wire Lambda sensor from Powerstation and not sure which wire on the sensor goes to which wire on the cars wiring as they are different colours.
The car has the following wires:
1. Black with red stripe
2. Red with black stripe
3. White with red stripe.
The new lambda sensor has the following:
1. White
2. White
3. Black
The car is a 93 wrx any help would be greatly appreciated, thanks
Taylor.
The car has the following wires:
1. Black with red stripe
2. Red with black stripe
3. White with red stripe.
The new lambda sensor has the following:
1. White
2. White
3. Black
The car is a 93 wrx any help would be greatly appreciated, thanks
Taylor.
#2
#3
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Mar 2007
Location: Bridgend
Posts: 2,268
Likes: 0
Received 0 Likes
on
0 Posts
Cheers Gaz, only problem is that when myself and a mate went to change the sensor the plug had been cut off and the wires joined via crimps to the original car wires, hence the sensor had already been changed previous to me owning the car, so i don't have the original plug to look at. So from what you've said, all i need to do is find out which is the signal wire on the cars wiring (as i know its the black wire on the new sensor wiring), and the other two can connect to the remaining two in any order.
#5
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Mar 2007
Location: Bridgend
Posts: 2,268
Likes: 0
Received 0 Likes
on
0 Posts
Can't remember Gaz. We had previously fitted the sensor to the car a couple of months ago and on having the car remapped last week the mapper said that the reading from the sensor was wrong as it showed a constant 5.1 volts where as it should be between 0 and 0.9 volts, so the wiring must be wrong. Hopefully this hasn't damaged the sensor and its simply a case of changing the wires around. Think i'll have to give Powerstation a call tomorrow, i hoped that somebody had changed the sensor on a 93 car recently and knew what the standard coloured wires represented so i could match them up to the new sensor. Greatly appreciate your help Gaz.
Trending Topics
#10
Scooby Regular
iTrader: (10)
Join Date: Dec 2006
Location: The valleys butt :)
Posts: 1,329
Likes: 0
Received 0 Likes
on
0 Posts
The black wire of the universal sensor goes to the white with red stripe on the multi plug/wiring loom, the other two can go either way, being just the heater wires.
Havn't long changed mine so the info is still fresh in my head
Havn't long changed mine so the info is still fresh in my head
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM