Lambda Sensor Wiring
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Mar 2007
Location: Bridgend
Posts: 2,268
Likes: 0
Received 0 Likes
on
0 Posts
Lambda Sensor Wiring
Hi guys bought a universal 3 wire Lambda sensor from Powerstation and not sure which wire on the sensor goes to which wire on the cars wiring as they are different colours.
The car has the following wires:
1. Black with red stripe
2. Red with black stripe
3. White with red stripe.
The new lambda sensor has the following:
1. White
2. White
3. Black
The car is a 93 wrx any help would be greatly appreciated, thanks
Taylor.
The car has the following wires:
1. Black with red stripe
2. Red with black stripe
3. White with red stripe.
The new lambda sensor has the following:
1. White
2. White
3. Black
The car is a 93 wrx any help would be greatly appreciated, thanks
Taylor.
#2
i think that the black wire on the new sensor is the signal wire, if you have a look at the old sensor plug the terminal which is gold plated is the signal wire and the other two don't mater as they are just the heater wires
#3
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Mar 2007
Location: Bridgend
Posts: 2,268
Likes: 0
Received 0 Likes
on
0 Posts
Cheers Gaz, only problem is that when myself and a mate went to change the sensor the plug had been cut off and the wires joined via crimps to the original car wires, hence the sensor had already been changed previous to me owning the car, so i don't have the original plug to look at. So from what you've said, all i need to do is find out which is the signal wire on the cars wiring (as i know its the black wire on the new sensor wiring), and the other two can connect to the remaining two in any order.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM