Engine Keeps Revving For A Second After I Lift Off
#1
Engine Keeps Revving For A Second After I Lift Off
This is a bit annoying. 2000 Classic UK Turbo saloon.
When I change gear, and lift off the gas, it revs-on for half a second.
I have checked the cable and TB movement, which all seems to be free, and snapped back when I lift off (doing it manually from engine bay), but it still revs on.
Is this a TPS or afm problem?
This happens at any RPM, so I don't think it's a turbo or boost related problem.
Thanks,
Dave.
When I change gear, and lift off the gas, it revs-on for half a second.
I have checked the cable and TB movement, which all seems to be free, and snapped back when I lift off (doing it manually from engine bay), but it still revs on.
Is this a TPS or afm problem?
This happens at any RPM, so I don't think it's a turbo or boost related problem.
Thanks,
Dave.
Trending Topics
#11
Scooby Regular
Join Date: Jul 2006
Location: huddersfield
Posts: 392
Likes: 0
Received 0 Likes
on
0 Posts
double check cable you cant really test it just by using the throttle body lever as the cable just stays were it is it dont actually move in and out just comes away from the groove on the lever you need some1 to do it from in the car and watch for correct movement imo.
#12
mine didnt do it before, i had a misfire on cyl 1 was going to change the coil pack but light hasnt come on since subaru reset it but its been doing this since then, also put a longlife air filter on around the same time?? been doing it since then??? no idea.com
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM