Andygreer

iTrader: (4)

Guys id appreciate soem help.


Fitting a Oil catch can on a newage looked and looked any guides? as mine isnt working, unsure what to do.

Andy

silent running

You mean you have one already and need to fix it? Or that you're trying to fit one from scratch?

dynamix

iTrader: (3)

And how do you mean it isnt working?

Is it not catching any oil? or is there still oil going into the inlet?

Andygreer

iTrader: (4)

Hi guys, ive tryed to fit it but isnt catchign any thing, getting oil in the boost pipes still more than normal..... Just need a guide to see if i have the pipes in the right place
Andy

jasonius

iTrader: (1)

VTA instead of using a can..

340BHP-WRX

iTrader: (6)

Thats the way I have mine now,1 hose from each rocker breather and 1 from the crankcase breather running down under the car. I just need some filters to go on the end of the hoses now.
I also removed the PCV valve and plugged up the hose that goes to the throttle body.

Andygreer

iTrader: (4)

my can is VTA any ways so having the can there is the same as when you are saying but i wont get a big puddle of oil

Andy

340BHP-WRX

iTrader: (6)

What I found with having the catch can was that the condensation was collecting in the can and mixing with the oil vapours to produce a mayo type gunk !
Without the catch can I only get abit of condensation from the hoses,I dont get any puddles of oil.