esxboy

hi ya all, i have newly purchased my first scooby,a 95 impreza wrx import runnin what i assume is standard boost an tuning.im interested in makein it go faster,not nutty fast but a sencible fast like the equivelent of a stage 1 or that sort of level to raise the boost higher(safely) but not causing a major strain on the engine.i have a straight through exaust and big induction kit already. can anyone advise me what sort of mods i would need to go for next. any response`s would be much abliged......scott

bobthebodger

You could chip it very easily and run around 300bhp ....theres quite a few around just check fleabay....ESL do one

Knighty99

iTrader: (1)

I've got a 95 WRX with a full de cat exust down and up pipes, air filter, Front mount intercooler and a scooby ecu re-mapp runnin 305bhp . U can get upto 340bhp and still use the original intercooler.

fatsweaty

Esxboy,strange question but i have a 95 WRX as well ,can you tell me at what rpm you start getting boost and roughly when full boost,i only ask as mine starts to spool up at about 3000/3500 and full boost around the 4500 to 5000rpm mark.I also have full decat system,HKS induction,Superchip.

56blacksti

DRIVE DOWN A BIG HILL

HOPE THIS HELPS

MarkFitz

I/C Samco Y-Piece and DIY ported exhaust headers will give big gains, especially with spool-up response, boost threshold, etc. and will also drop charge temps...if not done already.

robsw

ee aw

no1nutter

iTrader: (1)

best thing 2 go 4 is ecu mapping, i had similar mods and recently took it 2 scoobyclinic, i promise u the smile on ur face when u drive out of there will not have been bigger b4. the difference is amazing.

borat52

While thats true that the best way to get the optimum out of your car would be a custom map, its not really cost efficient. I think I'm right in saying scoobyclinic charge about £600 to remap a scoobyecu for an early classic. ESL will do you an off the shelf chip for £195 which with a decat and decent induction will give you about 280bhp straight away. IMHO its not worth a custom remap untill you make a few more mods to the car as its tough to justify the rediculous cost. (In any case if you do want a custom remap your better off getting an apexi power FC and replacing your ECU with that for the remap).

esxboy

these are mods i got planned so far in next couple months front mount intercooler, full de cat zorst from turbo down,i understand this will make the car breath easyer.i have tdo4 an have been told a td05 would be a good upgrade!! if i just chip my ecu rather remap will this get the best out of these planned mods as this is as far as im going mod wise!an will i be able to increase my boost with these mods??my scooby is a 95 import an is 260bhp standard how much gains am i realisticly goin to get