I need a remap, what are my options.
#1
I need a remap, what are my options.
As above, i currently have a P1 with a full decat and a induction kit. Its time for a remap or a new ecu and map. What are my options? im in the kent area. The only thing im not keen about at the moment is high speed runs whilst mapping.
Any advice appreciated
Cheers
Any advice appreciated
Cheers
#2
Scooby Regular
Join Date: Oct 2005
Location: East Sussex
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Several of us went to POWER ENGINEERING for the day, I had mine re-mapped £550 + VAT, worth every penny and they set the car up perfect. I was over boosting/fuelling and sorted it all for me.
Check the link out
http://www.powerengineering.co.uk/
Check the link out
http://www.powerengineering.co.uk/
#3
Originally Posted by adzipalmer
Several of us went to POWER ENGINEERING for the day, I had mine re-mapped £550 + VAT, worth every penny and they set the car up perfect. I was over boosting/fuelling and sorted it all for me.
Check the link out
http://www.powerengineering.co.uk/
Check the link out
http://www.powerengineering.co.uk/
Thanks bud
#4
Scooby Regular
Ecutek or Apexi, your choice, simon roe is pretty near to you if you decide to go down the apexi route
http://www.jollygreenmonster.co.uk/
p.s turn the bloody snow off simon
http://www.jollygreenmonster.co.uk/
p.s turn the bloody snow off simon
Trending Topics
#8
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by Andy McCord
Ecutek or Apexi, your choice, simon roe is pretty near to you if you decide to go down the apexi route
http://www.jollygreenmonster.co.uk/
p.s turn the bloody snow off simon
http://www.jollygreenmonster.co.uk/
p.s turn the bloody snow off simon
It was winter until the weekend! my excuse and sticking to it.
Thanks
Simon
#9
Scooby Regular
Join Date: Nov 2004
Location: In a 405 BHP/360 ft/lb P1 with SN superstar Sonic dog at my side!
Posts: 1,959
Likes: 0
Received 0 Likes
on
0 Posts
nip over to www.p1woc.co.uk and ask advice
loads of people there who have P1's with Tek3 maps, and most of them done by Bob Rawle in Swindon. contact www.brdevelopments.com
Its on the road mapping - but of course you will not be driving it on the rollers will you? the speeds are nothing to worry about. my first time was pooping it, but there is no pressure - you will only be asked to put your foot down when its safe. Most of the mappers know there own roads well, where the rozzers hide etc and will normally do a recce run first.
I have been maybe 4 times now with Bob, its nothing to worry about.
at that level, Tek3 will suffice, really only need to look at a ecu change at higher power.
Take your time in a P1 till its mapped, and put some octane booster in with your fuel
other respected tek 3 mappers
Zen performance (northants)
Andy F (scotland)
Jolly green monster
loads of people there who have P1's with Tek3 maps, and most of them done by Bob Rawle in Swindon. contact www.brdevelopments.com
Its on the road mapping - but of course you will not be driving it on the rollers will you? the speeds are nothing to worry about. my first time was pooping it, but there is no pressure - you will only be asked to put your foot down when its safe. Most of the mappers know there own roads well, where the rozzers hide etc and will normally do a recce run first.
I have been maybe 4 times now with Bob, its nothing to worry about.
at that level, Tek3 will suffice, really only need to look at a ecu change at higher power.
Take your time in a P1 till its mapped, and put some octane booster in with your fuel
other respected tek 3 mappers
Zen performance (northants)
Andy F (scotland)
Jolly green monster
Thread
Thread Starter
Forum
Replies
Last Post
spudboytim
Other Marques
10
26 September 2015 01:19 PM
charlesr
Engine Management and ECU Remapping
7
26 September 2015 10:46 AM