hello people , my scooby is a bit sick bairly made it home and found error 42 from the ecu. anyone know what it is and how to fix ??

thanks in advance

 

42 is idle switch not sure how to fix reset the ecu and see it comes up again

 

cheers, going to reset it later

 

anyone else got any idea ?????

 

just reset my ecu still have error 42 an car drive like s&!t, sound from the engine is like someone blowing into a bottle any ideas ???
could it be a problem from the dv?

 

anyone ?????

 

anyone ??

 

Try clean the TPS, throttle position sensor, it sits on top of the throttle body, take it out and clean with some brake cleaner, check the wiring, then clear the error codes and see how it acts up

Reg

 

i'll try that later, thanks reggie.

 

I missed the blowing into a bottle sound you mention, check for loose hoses, split hoses around the turbo area, does sound like you have a leak somewhere

good luck

 

hi there sorry to hear about ur probz
wot year and model is the vehicle??
where did u get erroe 42 from?? ecu etc
get back to me and maybe i can help

 

ya i got error 42 from the ecu when checked any ideas ??

 

forgot to add it's a 95 wrx

 

throttle switch on a my95 is on the accellerator pedal.

 

If you look up into the driver's footwell, you will see a microswitch in the pedal box, which is operated by the throttle pedal.

This should click on/off whre releasing/pressing the pedal.

Check the switch for correct operation and continuity.

 

i tought that error 43 was the trottle switch could this still sffect it ?

 

sounds like you have a hose off / split .

 

ya you could be right, i must have a good look at it later, thanks