mbc help
#1
Scooby Regular
Thread Starter
Join Date: Nov 2005
Location: Devon
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
mbc help
I know you've heard this a 1000 times,but...........anybody got any pics about fitting one?or just some friendly advice.It's for a v6 type R
many thanks
dan
many thanks
dan
#4
Scooby Regular
Thread Starter
Join Date: Nov 2005
Location: Devon
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
surprise ,surprise Ron ,i bought it from ebay (gtschris).it's a manual 1 supposedly fitted from the boost source to the wastegate.looks a bit like a metal tee-piece with the boost adjuster at one end.I presume you cut the pipe from the boost solenoid and join it there? don't quote me on that!
Sorry if its a bit vague.
Many thanks Ron.
Dan
Sorry if its a bit vague.
Many thanks Ron.
Dan
#5
Scooby Regular
Join Date: Sep 2000
Location: Deepest Darkest Dorset!!
Posts: 10,011
Likes: 0
Received 1 Like
on
1 Post
You need to put a (ideally new) pipe from the inlet impeller housing onto the straight end, and the pipe on the 'T' piece go's to the actuator......
I would avoid using the old pipes, cos one of them had a very small brass restrictor in it.....
Then presumably you adjust the '****' until you reach the desired boost, do you have a boost gauge...??
it'd be better to loosen the **** to start with, cos tightening it will uncrease boost, and you don't wanna have too much of that straight away..... even though lots of boost = big grins...!!
I would avoid using the old pipes, cos one of them had a very small brass restrictor in it.....
Then presumably you adjust the '****' until you reach the desired boost, do you have a boost gauge...??
it'd be better to loosen the **** to start with, cos tightening it will uncrease boost, and you don't wanna have too much of that straight away..... even though lots of boost = big grins...!!
#6
Scooby Regular
Thread Starter
Join Date: Nov 2005
Location: Devon
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
nice one Ron.Am i right in thinking the pipe is about,say,4or5 inches long?and is visible when looking down from the offside of the engine bay?
Once again ,thanks Ron
Once again ,thanks Ron
#7
Scooby Regular
Join Date: Sep 2005
Location: Whitley Bay
Posts: 1,563
Likes: 0
Received 0 Likes
on
0 Posts
Try looking here -
http://stefanostadal.homedns.org/car_mods_engine.htm
might be a good idea to post a picture of the controller! I saw one on Ebay that was described as fitting any turbo car. I researched on the net and here only to find out it was actually a diesel one!
Post the pic and someone will confirm!!!!
http://stefanostadal.homedns.org/car_mods_engine.htm
might be a good idea to post a picture of the controller! I saw one on Ebay that was described as fitting any turbo car. I researched on the net and here only to find out it was actually a diesel one!
Post the pic and someone will confirm!!!!
Trending Topics
#9
Scooby Regular
Thread Starter
Join Date: Nov 2005
Location: Devon
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
thats the boy!
Thanks a lot chaps,really helped me out there.If theres anything i could help you 2 out with just give me a shout.
once again ,cheers.
Dan
Thanks a lot chaps,really helped me out there.If theres anything i could help you 2 out with just give me a shout.
once again ,cheers.
Dan
#11
Scooby Regular
Join Date: Sep 2000
Location: Deepest Darkest Dorset!!
Posts: 10,011
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by Type R Dan
thats the boy!
Thanks a lot chaps,really helped me out there.If theres anything i could help you 2 out with just give me a shout.
once again ,cheers.
Dan
Thanks a lot chaps,really helped me out there.If theres anything i could help you 2 out with just give me a shout.
once again ,cheers.
Dan
I'm a bit useless at getting the 'ladies'..... any help appreciated...
Thread
Thread Starter
Forum
Replies
Last Post