max power from md321 turbo
max power from md321 turbo
19 December 2004, 05:27 PM
#3
Scooby Regular
Join Date: Aug 2003
Posts: 2,881
Likes: 0
Received 0 Likes
on
0 Posts
I managed 362 on an STi 8 @1.5 bar boost.
I know people that have had 390 ish but thats been with headers and NF (which can account for 10% extra power depending upon dosage used.)
I know people that have had 390 ish but thats been with headers and NF (which can account for 10% extra power depending upon dosage used.)
Last edited by The Fixer; 10 June 2008 at 08:25 PM.
19 December 2004, 05:34 PM
#4
Scooby Regular
Join Date: Dec 2002
Location: West Sussex-Scoob stripped :( Hello Audi A6 4.2V8 Quattro :)
Posts: 632
Likes: 0
Received 0 Likes
on
0 Posts
MD321
I could be mistaken but I'm sure someone will put me right if I'm wrong
I have a MD309 and I am running around the 400bhp mark, and I think it could go to about 450 bhp if pushed with the right engine and mods,
I think the MD321 is good for about 350 to 400 bhp, again with a lot of mods to support it.
Hope this gives you an idea anyway
Kev
I have a MD309 and I am running around the 400bhp mark, and I think it could go to about 450 bhp if pushed with the right engine and mods,
I think the MD321 is good for about 350 to 400 bhp, again with a lot of mods to support it.
Hope this gives you an idea anyway
Kev
19 December 2004, 06:20 PM
#5
Scooby Regular
Thread Starter
Join Date: Mar 2004
Location: 94wrx 341bhp/328lbtorque 6 speed box
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
i have already bought the turbo as i was told when ordering that it was capable of 400bhp+! i was aiming to get the car to about 450bhp. im now feeling that i was a little misled as to what power i would get.
nathan
nathan
Last edited by powercrazed; 19 December 2004 at 06:24 PM.
19 December 2004, 07:02 PM
#6
Scooby Regular
Join Date: May 1999
Location: SSO2003 2nd, SSO2005 1st, SSO2006 2nd, TACC Rd4 5th 4wd: In my car ;-)
Posts: 2,637
Likes: 0
Received 0 Likes
on
0 Posts
Nathan,
There are several versions of the MD321, one being an MD321 !, and the others being MD321"S" versions.
The MD321 has produced 400bhp + on various cars, including circa 415bhp at PE on Alan Mcrae's, and 406bhp on Jonno's car at G-Force.
Realistically, I would say it's good for about 420bhp max, on pump fuels.
The MD321S's are bigger turbo's, but I'd need a serial no. to give you the exact spec'.
"S" designated versions are certainly capable of 450bhp + with the correct supporting mod's.
Mark/Lateral Performance.
There are several versions of the MD321, one being an MD321 !, and the others being MD321"S" versions.
The MD321 has produced 400bhp + on various cars, including circa 415bhp at PE on Alan Mcrae's, and 406bhp on Jonno's car at G-Force.
Realistically, I would say it's good for about 420bhp max, on pump fuels.
The MD321S's are bigger turbo's, but I'd need a serial no. to give you the exact spec'.
"S" designated versions are certainly capable of 450bhp + with the correct supporting mod's.
Mark/Lateral Performance.
19 December 2004, 10:32 PM
#7
Scooby Regular
Thread Starter
Join Date: Mar 2004
Location: 94wrx 341bhp/328lbtorque 6 speed box
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
the part number on the turbo is MD321 and the serial number is HO53JD.if its the non 's' version, what do i need to do to make it an 's' version?
nathan
nathan
Trending Topics
20 December 2004, 05:18 PM
#10
Scooby Regular
Thread Starter
Join Date: Mar 2004
Location: 94wrx 341bhp/328lbtorque 6 speed box
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the help guys. have now had my misconseptions cleared up. gonna keep the turbo, max it out and see what i get.
nathan
nathan
Thread
Thread Starter
Forum
Replies
Last Post
Wingnuttzz
Member's Gallery
30
26 April 2022 11:15 PM
MightyArsenal
Wheels, Tyres & Brakes
6
25 September 2015 08:31 PM
