dhorwich

Hi,

My car is a MY95 WRX

Does anyone elses speedo needle wobble about when doing speeds rangeing from 0-50mph, it seems to stop after about 50+...

Just getting on my nerves...!!

Dan...

dnb

Not on my scoob - my old Peugeot used to do that. I put it down to the cable ends being worn. Never did find out exactly what it was.

Miki

Dan,

unplug the connector at the gearbox end and give it a decent cleanup. I had 'bout the same prob as you and the already mentioned connector was the reason...

-Miki-

MY95 Turbo Wagon

dhorwich

cheers...

Where is the sensor located at the gear box end, and is it easy to get to...

Dan

spence7

dhorwich, you should be able to follow the cable from the bulkhead and down through the engine compt and physically just about see where it connects into the gearbox...It's a bit of a b4rsteward to unscrew cos mine has a plaggy thread which is so difficult to thread on when the cable is loading it. Anyway, you should find it no probs once you get down there.

cheers
Alex

Stephen Cole

Since yours is an early MY
it will have a mechanical speedo drive

Your conversion from kmh has probably put a reduction gearbox in the cable
(usually somewhere near where it passes the clutch master cylinder, but possibly elsewhere)

Try giving all parts of the cable a bit of a 'wobble' to ensure it has a smooth path etc

Mine also wobbles occasionally, and sometimes clicks, at certain speeds at at certain ambient / underbody tempuratures

dhorwich

cheers mate...

Just another thing, i was doing a 0-60 the other day and i cant seem to get 60 in 2nd gear, it hits the limiter... im thinking that the KPH to MPH thingy is not that accurate.... surely i shouldnt have to grab 3rd for 60...!!???

Any thoughts...anyone..????

Dan
(MY95 WRX)

MorayMackenzie

It might be worth regreasing the cable once you've cleaned it.